User`s manual
Page 106
Tap any of the proles to set up its parameters. A new screen is displayed with the
attributes currently saved in the prole.
Tap any of the buttons to modify the following parameters:
Parameter Description
Name Tap this button to change the name of the prole. This name
helps you tell one prole from the others.
Dimensions Tap one of these buttons to change the dimensions of the
lorry.The following parameters can be set:
• Length
• Width
• Height
Trailer Tap this button to set whether a trailer is attached to your lorry.
Axles Tap this button to set the current number of axles under your
vehicle.
Weight Tap one of these buttons to change the current or the
maximum allowed weight of the lorry.
Freight The current freight of the lorry may contain hazardous
materials. Tap this button to select the hazard categories that
apply to your current freight.
Max. Speed Tap this button to set the maximum speed of the lorry. You
may decide to set the maximum speed allowed for your lorry
instead to avoid inaccurate routes due to missing or bad lorry
speed limit information in the map data.
You have two more functions on the main screen:
Button Description
Turn this switch on to be able to set the waiting time for all
waypoints of the route. This way your ETA calculation will take
into account the idle times and time dependent restrictions and
trafc patterns can also be considered for the whole route.