Full Product Manual

- 18 -
MENU ITEM FUNCTION SETTINGS
Left Display
(GPS on)
Lets you select various attributes
to display on the left side of the
OLED.
Speed (Default)
Spd + Compass
Compass
Voltage
Altitude (m or ft)
Altitude display depends
on speed unit selection
(see page 27).
Alert Display Select one of two OLED display
formats (see page 26).
Alert Display #1 (Default)
Alert Display #2
Speed Unit
(GPS on)
Select the speed measurement
type.
mph (Default)
km/h
X Band Tone Set a tone to indicate X Band. 1 ~ 12 tones (Default = 1)
K Band Tone Set a tone to indicate K Band. 1 ~ 12 tones (Default = 2)
MRCD Tone Set a tone to indicate MRCD. 1 ~ 12 tones (Default = 2)
Ka Band Tone Set a tone to indicate Ka Band. 1 ~ 12 tones (Default = 3)
Bogey Tone Set a tone to indicate the
detector is responding to a
different Ka band signal.
1 ~ 5 tones (Default = 1)
Laser Tone Set a tone to indicate Laser. 1 ~ 12 tones (Default = 4)
Auto Mute Auto Mute reduces alarm level
to 1 after 3 seconds and returns
to normal operation (Auto Mute
= OFF) 10 seconds after the alert
ends. If the same alarm sounds
within the 10 second period,
Auto Mute remains at level
1. The unit returns to normal
operation (Auto Mute = OFF) if a
different band is detected during
Auto Mute = ON mode.
On (Default)
Off
Auto Mute
Volume
Sets a volume level for muted
alarms.
0 - 5 (Default = 2)
Off