Full Product Manual

- 22 -
HOW DO I ...? TRY THIS...
Delete a user mark Press MARK again at that location to delete the user
mark.
R7 stores 2000 points divided between Mute Memory
and User Mark locations.
Delete ALL user marks Press and hold MARK to delete all user marks.
The R7 does NOT ask for confirmation before deleting
single user marks.
Allocate dynamic
memory points between
Mute Memory and User
Marks
Press MENU and + to scroll to the Memory Quota;
menu. Press MENU to select it and press - and + to
change the allocation in 50 point increments. See page
23 for details.
Update the firmware and
database
Refer to www.unidensupport.com for details.
FEATURE DETAILS
AUTO DIM
The Auto Dim feature only displays in the menus if you select Auto using the R7
unit’s MUTE/DIM button or the power cord’s MUTE button.
The R7 has a light sensor that works with the Auto Dim feature to dim or brighten
the OLED display according to outside light levels. Configure OLED brightness/dim
levels through the Auto Dim setting in the menus.
Set DIM to Auto from the R7/Power Cord
1. Press and hold the MUTE/DIM button on the R7 device or the MUTE button on
the power cord. The current DIM level displays on the OLED.
2. Press the MUTE/DIM button on the R7 device or the MUTE button on the
power cord to change DIM levels until AUTO displays. The R7 device displays
and, if volume is turned on, announces the current feature setting.
Congure Auto Dim from MENU
1. Press MENU. Press + or - to scroll through the menu options until Auto Dim
Setting displays.