User Manual

26
3. Connect the other end of the USB cable to the
computer’s USB port or to an AC or DC adapter that
provides USB charging power.
Note: If you connect to a computer’s USB port, the PC will
prompt you for the drivers for your scanner. To download and
install these drivers, go to http://info.uniden.com/UnidenMan4/
SR30C.
4. The scanner displays CHArg and the low battery icon
while it charges the batteries. The screen goes blank
after the scanner is completely charged.
Dierent status messages may display, depending on the
battery type and scanner status:
LCD Message Batt.
Type
Meaning Scanner
Cond.
CHArg Ni-MH Scanner is charging. Off
None Ni-MH Unit is charged. Off
None Ni-MH Scanner is not
charging (Battery
selection switch is
set to Alk.)
Off
Err CHArg Ni-MH Batteries cannot
be charged (dead
battery).
Off
ILEgAL Ni-MH USB external power
is out of range.
Off
If the batteries are good, the scanner charges the batteries.
and it operates normally. If the scanner cannot immediately