User Manual
given to this function. It checks the weather alert signals
every 5 seconds. When the unit finds a warning signal, it
switches to the warning receive mode automatically.
• Weather Alert is activated even if Beep Tone is turned off.
NOAA Weather Radio Frequency List
Ch. Frequency (MHz) CH. Frequency (MHz)
1 162.550 5 162.450
2 162.400 6 162.500
3 162.475 7 162.525
4 162.425
SPECIFICATIONS
Channels 22 FRS/7 Weather
Privacy Codes 38 Sub-Codes
83 DCS Codes
Operating Freq.
GMRS/FRS 462.5500 - 467.7125 MHz
WX 162.4000 - 162.5500 MHz
FM
Power Source 3 AA Rechargeable NiMH Batteries
Range Up to 40 miles
FREQUENCY CHART
CH. Freq. Cross-Ref. CH. Freq. Cross-Ref.
1 462.5625 FRS & GMRS 1 12 467.6625 FRS 12
2 462.5875 FRS & GMRS 2 13 467.6875 FRS 13
3 462.6125 FRS & GMRS 3 14 467.7125 FRS 14
4 462.6375 FRS & GMRS 4 15 462.5500 GMRS 11
5 462.6625 FRS & GMRS 5 16 462.5750 GMRS 8
6 462.6875 FRS & GMRS 6 17 462.6000 GMRS 12
7 462.7125 FRS & GMRS 7 18 462.6250 GMRS 9
8 467.5625 FRS 8 19 462.6500 GMRS 13
9 467.5875 FRS 9 20 462.6750 GMRS 10
10 467.6125 FRS 10 21 462.7000 GMRS 14
11 467.6375 FRS 11 22 462.7250 GMRS15
NOTE: This product is considered an FRS only product in the US
market; it is considered a GMRS product in the Canadian
market.
DCS CODE LIST
Tone
No.
Octal
Code
Tone
No.
Octal
Code
Tone
No.
Octal
Code
39 023 67 174 95 445
40 025 68 205 96 464
41 026 69 223 97 465
42 031 70 226 98 466
43 032 71 243 99 503
44 043 72 244 100 506
45 047 73 245 101 516
46 051 74 251 102 532
47 054 75 261 103 546
48 065 76 263 104 565
49 071 77 265 105 606
50 072 78 271 106 612
51 073 79 306 107 624
52 074 80 311 108 627
53 114 81 315 109 631
54 115 82 331 110 632
55 116 83 343 111 654
56 125 84 346 112 662
57 131 85 351 113 664
58 132 86 364 114 703
59 134 87 365 115 712
60 143 88 371 116 723
61 152 89 411 117 731
Tone
No.
Octal
Code
Tone
No.
Octal
Code
Tone
No.
Octal
Code
62 155 90 412 118 732
63 156 91 413 119 734
64 162 92 423 120 743
65 165 93 431 121 754
66 172 94 432
CTCSS Chart (Hz)
Code Freq. Code Freq. Code Freq.
oF OFF 13 103.5 26 162.2
1 67.0 14 107.2 27 167.9
2 71.9 15 110.9 28 173.8
3 74.4 16 114.8 29 179.9
4 77.0 17 118.8 30 186.2
5 79.7 18 123.0 31 192.8
6 82.5 19 127.3 32 203.5
7 85.48 20 131.8 33 210.7
8 88.5 21 136.5 34 218.1
9 91.5 22 141.3 35 225.7
10 94.8 23 146.2 36 233.6
11 97.4 24 151.4 37 241.8
12 100.0 25 156.7 38 250.3
MAINTENANCE
To be safe and sure:
• Never open your radio’s case.
• Never change or replace anything in your radio except the
batteries.
Care and Safety
To clean the radio, use a soft cloth dampened with water. Do not use
cleaners or solvents because they can harm the body of the unit and
leak inside, causing permanent damage. Use a dry, lint-free cloth to
clean the battery contacts. Do not submerge the unit in water. If the
unit gets wet, turn it off and remove the batteries immediately.
Dry the battery compartment with a soft cloth to minimize potential
water damage. Leave the battery compartment cover off overnight to
ensure complete drying. Do not use the radio until the unit is
completely dry.
Your radio might cause TV or radio interference even when it is
operating properly. To determine whether your radio is causing the
interference, turn it off. If the interference goes away, your radio is
causing it. Try to eliminate the interference by moving your radio
away from the receiver. If you cannot eliminate the interference, the
FCC requires that you stop using the radio.
Hazardous Environments
Do not operate the radio in hazardous environments. Explosion or
fire may result. Do not operate the radio near unshielded electrical
blasting caps.
Under certain conditions, radios can interfere with blasting
operations and may cause an explosion. Turn your radio OFF to
prevent accidental transmission when in a blasting area or in areas
posted: "Turn off two-way radio." Construction crews often use
remote control RF devices to set off explosives.
WARNING! Read this information before using the radio. In August
1996 the Federal Communications Commission (FCC) of the United
States with its action in Report and Order FCC 96-326 adopted an
updated safety standard for human exposure to radio frequency
electromagnetic energy emitted by FCC regulated transmitters.
Those guidelines are consistent with the safety standard previously
set by both U.S. and international standards bodies. The design of
the radio complies with the FCC guidelines and these international
standards.
Never allow children to operate the radio without adult supervision
and the knowledge of the following guidelines.
RF EXPOSURE INFORMATION
WARNING! It is up to the user to properly operate this radio
transmitter to insure safe operation. Please adhere to the following:
Do not use the radio with a damaged antenna. If a damaged
antenna comes into contact with the skin, a minor burn may result.
Please contact your local dealer for a replacement antenna.
Hand-Held Operation (Held-to-Face)
This device was evaluated for typical hand-held (held-to-face)
operations with a 1 inch spacing from the front of the radio. For
hand-held operation, the radio should be held 1 inch from the user's
face in order to comply with FCC RF exposure requirements.
Body-Worn Operation
This device was evaluated for body-worn operations with the supplied
belt-clip accessory. (All necessary accessories are included in the
package; any additional or optional accessories are not required for
compliance with the guidelines.) Third party accessories (unless
approved by the manufacturer) should be avoided as these might not
comply with FCC RF exposure guidelines.
For body worn operation, this device has been tested and meets the
Industry Canada RF exposure guidelines when used with Uniden
accessories supplied or designated for this product. Use of other
accessories may not ensure compliance with Industry Canada RF
exposure guidelines.
Fonctionnement de l’appareil, lorsque porté sur le corps. Cet
appareil a été testé et s’est avéré conforme aux normes d’Industrie
Canada et approuvé pour le port sur le corps à l’aide des
accessoires Uniden inclus et conçus pour cet appareil. L’utilisation
d'accessoires ne respectant pas les exigences d'exposition RF
d’Industrie Canada doit être évitée.
FCC PART15/
IC COMPLIANCE
FCC PART 15 COMPLIANCE
This device complies with Part 15 of the FCC rules. Operation is
subjected to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
Avis de conformité à la FCC : Ce dispositif a été testé et s’avère
conforme à l’article 15 des règlements de la Commission fédérale
des communications (FCC). Ce dispositif est soumis aux conditions
suivantes: 1) Ce dispositif ne doit pas causer d’interférences
nuisibles et; 2) Il doit pouvoir supporter les parasites qu’il reçoit,
incluant les parasites pouvant nuire à son fonctionnement.
Tout changement ou modification non approuvé expressément par la
partie responsable pourrait annuler le droit à l’utilisateur de faire
fonctionner cet équipement.
IC COMPLIANCE
This device contains license-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada's license-exempt RSS(s). Operation is subject to the
following two conditions:
1. This device may not cause interference.
2. this device must accept any interference, including interference
that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the
equipment.
Cet appareil contient un ou des émetteurs/récepteurs exemptés de
licence qui sont conformes aux normes RSS d'Innovation, Sciences
et Développement économique Canada exemptées de licence.
L'utilisation est soumise aux deux conditions suivantes :
1. Cet appareil ne doit pas causer d'interférences.
2. Cet appareil doit accepter toute interférence, y compris les
interférences susceptibles de provoquer un fonctionnement
non désiré de l'appareil.
Tout changement ou modification non approuvé expressément par la
partie responsable pourrait annuler le droit à l’utilisateur de faire
fonctionner cet équipement.
ONE-YEAR WARRANTY
IMPORTANT: SAVE YOUR RECEIPT! Evidence of original
purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the
original retail owner, this Uniden Product to be free from defects in
materials and craftsmanship with only the limitations or exclusions
set out below.
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is:
(A) damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits, sub-
assemblies, or any configurations not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone other than an
authorized Uniden service center for a defect or malfunction covered
by this warranty, (E) used in any conjunction with equipment or parts
or as part of any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as detailed by the
owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not
conform to this warranty at any time while this warranty is in effect,
warrantor will either, at its option, repair or replace the defective unit
and return it to you without charge for parts, service, or any other
cost (except shipping and handling) incurred by warrantor or its
representatives in connection with the performance of this warranty.
Warrantor, at its option, may replace the unit with a new or
refurbished unit.
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE
AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND
IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF
ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED
OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE.THIS WARRANTY
DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT
OVERPAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of
incidental or consequential damages so the above limitation or
exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
This warranty is void outside the United States of America and
Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY:
If, after following the instructions in the owner’s manual you are
certain that the Product is defective, pack the Product carefully
(preferably in its original packaging). Disconnect the battery from the
Product and separately secure the battery in its own separate
packaging within the shipping carton. The Product should include all
parts and accessories originally packaged with the Product. Include
evidence of original purchase and a note describing the defect that
has caused you to return it.The Product should be shipped freight
prepaid, by traceable means, to warrantor at:
Uniden America Corporation
C/O Saddle Creek
743 Henrietta Creek Road, Suite 100
Roanoke, TX 76262
© 2019 Uniden America Corporation Issue 1, December 2019
All rights reserved Printed in China