UC772EZ ENG(24-148) 10/9/01 15:23 Page i
UC772EZ ENG(24-148) 10/9/01 15:23 Page ii Contents Introduction/Features Controls and Functions 2 4 Getting Started Read Step Step Step Step this f irst 1: Checking the package contents 2: Setting up the base unit 3: Installing the handset battery pack 4: Setting Caller ID options Entering your Area Code 6 7 8 10 12 13 Memory Dialing Storing phone numbers and names Steps for entering names and special characters Making calls with memory dialing Chain dialing Editing a stored name and/or phone num
UC772EZ ENG(24-148) 10/9/01 15:23 Page 1 The Integrated Answering Device Features Setting up your answering system Using your answering system 39 40 44 Additional Information Changing the digital security code Installing the beltclip Headset installation Note on power sources Maintenance Troubleshooting General Information Technical Information Precautions & Warranty Index 49 50 50 51 52 53 55 56 58 60
UC772EZ ENG(24-148) 10/9/01 15:23 Page 2 Welcome Congratulations on your purchase of the 24-148 cordless telephone. This phone is designed for reliability, long life and outstanding performance utilizing the latest in 2.4 GHz Spread Spectrum technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. Features • 2.
UC772EZ ENG(24-148) 10/9/01 15:23 Page 3 D i g i t a l S p r e a d S p e c t r u m T e c h n o l o g y utilizes a “wider frequency band“ vs. a “ s i n gle narrow band“ used in standard digital transmissions. The 2.4 GHz frequency range was recently released to commercial communications. The result is a more secure conversation with the clarity of digital sound, extended range, and minimal interference from other cordless phones.
UC772EZ ENG(24-148) 10/9/01 15:23 Page 4 Controls and Functions 1 2 4 5 6 7 8 9 3 14 15 10 16 11 12 13 17 18 19 [4] CONTROLS AND FUNCTIONS 1. Handset Antenna 2. Headset Jack Cover 3. Handset Batter y Compar tment 4. Handset Earpiece 5. LCD Display 6. Volume Up Key 7. Memor y Key 8. Talk Key 9. Volume Down Key 10. /Tone/Lef t Cursor Key 11. Redial/p (pause) Key 12. Options Key 13. Handset Microphone 14. Flash Key 15. Cid (Caller ID) Key 16. # /Right Cursor Key 17. Delete Key 18.
UC772EZ ENG(24-148) 10/9/01 15:23 Page 5 27 28 20 29 21 22 23 24 25 26 30 31 32 33 34 35 36 37 41 42 43 44 38 39 40 20. Base Charging Contacts 21. Delete Key 22. Voice Memo Key 23. Base Speaker 24. Greeting Key 25. Pin Set Key 26. Speaker Key 27. Status LED 28. Speaker LED 29. Play Key 30. Skip Key 31. Repeat Key 32. Answer On/Of f Key 33. Clock Set Key 34. Page/Find Key 35. Base Antenna 36. Volume Down Key 37. Volume Up Key 38. Record Time Switch 39. Ring Time Switch 40. Base Microphone 41.
UC772EZ ENG(24-148) 10/9/01 15:23 Page 6 Read This First This cordless telephone must be set up before use. Follow these steps: Step 1 (page 7) Unpack the telephone and accessories. Step 2 (page 8 to 9) Next, choose the best location to set up the base unit. Base unit Step 3 (page 10 to 11) Then, inser t the batter y pack into the handset. You must charge the batter y pack for 1 5 - 2 0 h o u r s b e f o r e p l u g g i n g i n t o Handset the phone line and using the phone.
UC772EZ ENG(24-148) 10/9/01 15:23 Page 7 G E T T I N G S TA R T E D Checking the Package Contents Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Par ts Depar tment (see below).
UC772EZ ENG(24-148) 10/9/01 15:23 Page 8 Setting Up the Base Unit Do the following steps: • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read “ INSTALLATION CONSIDERATIONS “ in “ PRECAUTIONS & WARRANT Y“ .
UC772EZ ENG(24-148) 10/9/01 15:23 Page 9 1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet. • Place the power cord so it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard. 2 Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 3 Set the base unit on a desk or tabletop. Place the handset on the base unit as shown. Then raise the antenna to a ver tical position.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 10 Installing the Handset Battery Pack Charge the battery pack for 15-20 hours before plugging the phone line into your phone. 1 Press in on the batter y cover release and slide the cover down until it comes of f. 2 Connect the batter y pack connector with the correct polarity (black and red wires), then inser t the batter y pack into the batter y compar tment. 3 Slide the batter y cover forward until it snaps into place. 4 Place the handset on the base as shown.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 11 From fully charged • 6 hours continuous use. • 10 days when the handset is in the standby mode. When the battery charge becomes low When the batter y pack is ver y low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “ Low Battery“ flashes and none of the keys will operate. If the phone is in use, “ Low Battery“ flashes and the handset beeps.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 12 Setting Caller ID Options/Language There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. (See page 13 for Area Code setup instructions.) AutoTalk TM allows you to answer the phone without pressing the button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not on the base, press any key to answer the call.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 13 If you enter a 3-digit area code number in th e “ Area Code“ option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number. 1 When the phone is in the standby mode, press The Caller ID setting screen appears.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 14 Making a Call Dialing from Standby Mode 1 Enter the phone number. • Press if you enter a wrong number in step 1. To delete all the numbers that you have entered, press and hold until the display clears. • You must press a key within 20 seconds or the phone will return to standby. • Refer to terminology explanation on page 3 if necessary. [ 14 ] B A S I C S . 2 Press “ Talk“ flashes on the display. Then current volume setting is displayed.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 15 Dialing from Talk Mode 1 Press . “ Talk“ flashes on the display. Then the current volume setting is displayed. Talk E x a m p l e : Volume Medium. If you set the ringer to off, ““ appears Af ter about 5 seconds, the call-time display appears. 3 To hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds. BASICS 2 Dial the phone number.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 16 Receiving a Call From the handset If you receive a Caller ID, the received Caller ID information appears. 1 The phone rings. “ Incoming Call“appears on the display. Incoming Call 2 Press . “ Talk“ and volume setting appear on the display. If you set the ringer to off, ““ appears on the Talk 0:02 3 Talk with the caller. 115:35 4 To hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds.
UC772EZ ENG(24-148) 10/9/01 15:24 Page 17 From the base status LED speaker LED 1 The phone rings. The s t a t u s LED on the base flashes. 2 Press and begin speaking. The s p e a k e r LED lights. 3 To hang up, press . The base microphone is located under the base. Position yourself as near to the base as possible and speak clearly.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 18 Adjusting the Volume Ringer A High Handset ringer tone and volume Ringer A Low Press • or ª in Standby mode to select one of four ringer tone and volume combinations. Ringer B High • Ringer B Low Pressing • or ª during a call will change the earpiece volume of the handset. This setting will remain in ef fect af ter the telephone call has ended. • in Maximum mode or ª in Low mode, an error tone sounds.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 19 Redialing a Call The last three phone numbers dialed can be quickly redialed. Redialing from Standby Mode From the Handset 1 Press . The phone number that was last dialed appears on the display. 2 Press again. Each press of will display one of the last three numbers dialed. • Press and hold to delete the displayed redial number. • Refer to terminology explanation on page 3, if necessary. 3 Press .
UC772EZ ENG(24-148) 10/9/01 15:25 Page 20 Redial from Talk Mode 1 Press . “ Talk“ and the volume setting appears on the display. Only the last number dialed can be accessed after has been pressed. If you set the ringer to off, ““ appears on 2 Press . The last number dialed will be displayed and redialed. 3 To hang up, press or place the handset on the base. The call-time will be displayed for about 5 seconds.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 21 Storing Phone Numbers and Names Memor y Dialing allows you to dial a number using just a few key strokes. Your 24-148 stores up to 20 names/numbers in the handset. With the Handset 1 Press and hold is displayed. until “ Memory Store“ Memory Store 01 02 2 Press • and ª or enter a two-digit number (01 - 20) to select the memor y location where you would like to store the number. 3 Press .
UC772EZ ENG(24-148) 10/9/01 15:25 Page 22 5 Press . “ Store Number“ is displayed. The cursor flashes indicating that the display is ready for the number to be entered. The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits. 6 Use the number keypad to enter the phone number. The phone number cannot exceed 20 digits. • Use to enter pause in the dialing sequence. The display shows a “ P“.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 23 Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order: Upper case letters f irst, lower case letters next and f inally the number corresponding to the key.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 24 For example, to enter U n i d e n : 1 Pick up the handset and press and hold 2 Enter a number or press 3 Press • , ª . to select a memor y location number. . 4 Press twice. 5 Press five times. 6 Press six times. 7 Press four times, then press to move the cursor to the right. If the next character uses the same number key, you must press to move the cursor over.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 25 Making Calls with Memory Dialing Memory dialing from Standby Mode 1 Press . The handset displays your programmed memor y locations. 01 UNIDEN CORP 02 JOHN DOE 03 MOM AND DAD 2 Press • and ª or enter a two-digit number (01 - 20) to select the memor y location you would like to dial. 3 Press . “ Talk“ and the volume setting appear on the display. Then the displayed number is dialed.
UC772EZ ENG(24-148) 10/9/01 15:25 Page 26 Memory dialing from Talk Mode 1 Press . “ Talk“ and the volume setting appear. If you set the ringer to off, ““ appears on . Talk 3 Enter a two-digit number (01 - 20) to select the memor y location of the desired phone number. The selected phone number is displayed. Then the number is dialed.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 27 Editing a Stored Name and/or Phone Number 1 Press and hold is displayed. until “ Memory Store“ Memory Store 01 UNIDEN CORP 02 JOHN DOE 2 Press • and ª or enter a two-digit number (01 - 20) to select the memor y location you would like to edit. 3 Press . The following screen appears with the memor y location number that you have selected in the display. 4 Press to select “ Edit Memory“ , then press . The following screen appears.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 28 7 Use the number keypad, or to edit the phone number. The phone number cannot exceed 20 digits. (See page 22.) If you don´t want to change the phone number, skip this step. 8 Press . The handset beeps and displays the conf irmation screen. The memor y storage is complete. For example, if you store a name and number into memor y location number 01, the display shows “ Memory01 Stored“. Af ter about 2 seconds, “ Memory Store“ is displayed.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 29 Erasing a Stored Name and Phone Number 1 Press and hold is displayed. until “ Memory Store“ Memory Store 01 UNIDEN CORP 02 JOHN DOE 2 Press • and ª or enter a two-digit number (01 - 20) to select the memor y location you would like to erase. 3 Press . The following screen appears with the memor y location number that you have selected in the display.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 30 3-way Conferencing The Uniden 24-148 permits 3-way conversations between the handset, base, and outside line. Pressing the key on the base while dialing with the handset will set the 3-way conversation mode, and dialing is not affected. When speaking on the handset 1 Press on the base to join the 3-way conversation. 2 To hang up, press on the base. The handset will still be connected to the call.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 31 To locate the handset 1 Press on the base. When an incoming call is received during paging, paging is canceled and the telephone is switched to the incoming call. 2 The handset beeps for 60 seconds. The following screen appears: 3 Press any key on the handset or on the base, or return the handset to the base to end the page.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 32 Caller ID • If you answer a call before the Caller ID message is received (Example: before the second ring), the Caller ID message will not appear. • When the call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name do not appear. (This includes international calls.) • When the call is via a private branch exchange (PBX), the caller´s phone number and name may not appear.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 33 When an unknown name is received When the ringer is set off, ““ appears. 2 When you pick up the phone, the display changes to “ Talk“. (See page 14) Viewing the Caller ID Message List The Caller ID list stores information for up to 50 incoming calls - even unanswered calls. in the stanby mode . 1 Press The summar y screen appears. The screen shows the number of new messages and total messages.
UC772EZ ENG(24-148) 10/9/01 15:26 Page 34 Deleting Information from the Caller ID List • While using the “ Delete All?“ or “ Delete Message?“ screen if no key is pressed within 20 seconds, an error tone sounds and the telephone returns to standby. • If there is an incoming call or page, the deleting operation is canceled and the telephone is set to receive the incoming call or page. The 24-148 stores up to 50 messages.
UC772EZ ENG(24-148) 3 Press • 4 Press 10/9/01 or ª 15:27 Page 35 to select “ Yes“ o r “ No“ . or . W h e n t h e p o i n t e r i s a t “ Yes“ : A tone sounds and all stored Caller ID messages are deleted. W h e n t h e p o i n t e r i s a t “ No“ : The display returns to the summar y screen. Total:00 Using the Caller ID List Calling a party from the Caller ID list You can place a call from the Caller ID list. The 24-148 stores up to 50 messages. 1 Press .
UC772EZ ENG(24-148) 10/9/01 15:27 Page 36 Storing Caller ID messages in Memory dialing Messages shown in the Caller ID list can be stored in memor y dialing. Using the incoming call information (i.e., Caller ID list), the phone number of the par ty on the Caller ID list can be stored in memor y dialing. • You can not store a Caller ID message if no phone number appears in the message.
UC772EZ ENG(24-148) 10/9/01 15:27 Page 37 Using “Caller ID on Call Waiting” Service “Caller ID“ and “Call Waiting“ are separate services. CIDCW (Caller ID on Call Waiting) performs the same as regular Caller ID on a Call Waiting number. You must subscribe to the “Caller ID on Call Waiting (CIDCW) services“ before you can use the following features. The “Call Waiting“ service can also be used independently. Please contact your local telephone company for details.
UC772EZ ENG(24-148) 10/9/01 15:27 Page 38 Call Waiting Features When CIDCW is set to “ Opt“ in the Caller ID setup options (see page 12), you can view a list of ways to handle the new call. Your 24-148 gives you new options for call waiting. At the touch of a button, you can ask the caller to hold or conference them into your current call. You may be required to subscribe to call waiting and call waiting options to use these features. Not all features are available in all areas.
UC772EZ ENG(24-148) 10/9/01 15:27 Page 39 The Integrated Answering Device The 24-148 has a built-in answering system that answers and records incoming calls. You can also use your answering system to record a conversation, leave a voice memo message for others who use the phone, or to announce a special message to callers when yo u ´ re away from your phone.
UC772EZ ENG(24-148) 10/9/01 15:27 Page 40 Setting Up Your Answering System Turning the answering system on/off 1 To turn the answering system on, press message will be played and a tone will sound. 2 To turn the answering system of f, press . The current greeting again. When the answering system is full, displays on the base and the system announces “ No remaining time“. You should delete some messages so that the system can record new messages.
UC772EZ ENG(24-148) 10/9/01 15:27 5 The LED displays or correct AM/PM setting. Page 41 . Press or until you hear the 6 Press again to end the time/day setting. The 24-148 announces the day and time that you have set. Setting your greeting When you receive a call, the answering system automatically plays either a presrecord message or your own greeting. ▼ Preset Message The following message is prerecorded: “Hello, no one is available to take your call. Please leave a message af ter the to n e .
UC772EZ ENG(24-148) 10/9/01 15:27 Page 42 Selecting the message record time You can set your answering system to record messages up to one or four minutes long. One minute option: move the REC TIME switch to 1. Four minutes option: move the REC TIME switch to 4. ▼ Announce only feature: The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position. The message counter LED displays “ “ when the system is on standby.
UC772EZ ENG(24-148) 10/9/01 15:27 Page 43 Setting ring time switch The ring time/toll saver switch allows you to set the number of rings the caller hears before the answering system plays your outgoing message. You can set the switch to answer af ter two rings or af ter four rings. Once the greeting has star ted, you can stop it when you pick up the call at the handset or base.
UC772EZ ENG(24-148) 10/9/01 15:27 Page 44 Using Your Answering System Playing your messages • To stop playing your messages, press again. The base LED display shows the number of total messages. If the display is blinking, then there are new messages waiting for you. The 24-148 is designed to play your new messages f irst. Af ter you play your new messages you can then play your old messages. 1 Press . The system announces the number of new and old messages, then the incoming messages are played.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 45 Skipping a message 1 Press to review your messages. The number of messages is announced. 2 Press at anytime to skip to the next message. 3 Press standby. at any time to stop reviewing your messages and return to • Each time is pressed, the system scans forward one message. Deleting a message Deleting an individual message 1 Press to review your message. ▼ 2 If you decide to delete a message, press anytime during the message.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 46 Voice memo The voice memo function allows the user to record a message (up to 10 minutes) on the base. • The voice memo function is completely independent of the outgoing message. It´s handy for leaving others a quick message. • A voice memo message will be stored as a typical recorded message. • Position yourself as near to the base as possible and speak clearly. • A recorded conversation is stored and played back with typical recorded messages.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 47 Remote access away from home You can operate your answering system from a remote location using any touchtone telephone. Use this function to check for recorded messages, to play or delete messages, to record a new outgoing message, and to monitor sounds in the room. 1 Call your telephone number. 2 While the greeting message is played, press # and your PIN code within 2 seconds. If the answering system is of f, let it ring 10 times. The tone sounds.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 48 6 When you f inish, hang up to exit the system. The answering system automatically returns to standby. Remote room monitor If you enter an incorrect PIN code three times, an error tone sounds and the phone automatically hangs up. You can call your answering system from any touch-tone phone and monitor sounds in the room where your base is installed. 1 2 3 4 5 Call your telephone number. While the greeting message is playing, press # and your PIN code.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 49 The digital security code is an identif ication code used to connect the handset and the base unit. Normally, setting the code is not necessar y. The f irst time you charge your handset, the security code is automatically set. (See page 6.) In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. 1 Remove the handset from the base unit. Press on the base.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 50 Installing the Beltclip To attach the beltclip To remove the beltclip Inser t the beltclip into the holes on each side of the handset. Press down until it clicks. Pull both sides of the beltclip to release the tabs from the holes. Headset Installation Your phone may be used with an optional headset, the Uniden HS910. To use this feature, inser t headset plug into the headset jack. Your phone is ready for hands-free conversations.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 51 Battery replacement and handling When the operating time becomes shor t, even af ter a batter y is recharged, please replace the batter y. With normal usage, your batter y should last about one year. Please contact your place of purchase or the Uniden Par ts Depar tment for a replacement batter y. (See Page 7.) Power Failure During the period that the power is of f, you will not be able to make or receive calls with the telephone.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 52 Maintenance When slightly dirty Wipe with a sof t, dr y cloth. When very dirty Wipe with a sof t cloth that has been dampened with diluted, neutral detergent. Dr y with a dr y cloth. When the charging terminals become dirty Wipe with a dr y cloth or a pencil eraser, if necessar y. Caution Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the f inish.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 53 If your phone is not performing to your expectations, please tr y these simple steps f irst. Symptom Suggestion The s t a t u s LED won´t light • Make sure the AC adapter is plugged into the base unit and wall outlet. when the handset is placed • Make sure the handset is properly seated in the base unit. in the base unit. • Make sure the charging contacts on the handset and base unit are clean.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 54 Symptom The answering system does not work. Messages are incomplete. Af ter a power failure, the outgoing message is deleted. No sounds on the base unit speaker during call monitoring or message playback. Cannot access remote call-in features from another touchtone phone. Severe noise interference. If you still have a problem. Suggestion Make sure the base unit is plugged in. Make sure that the answering system is turned on.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 55 ADDITIONAL INFORMATION General Information The 24-148 complies with FCC Par ts 15 and 68. Operating Temperature: -10ºC to +50ºC (+14ºF to +122ºF) AC Adapter Information AC Adapter par t number: Input Voltage: Output Voltage: AD-313 120V AC 60Hz 9V DC 400 mA Battery Information Batter y par t number: BT-800 Capacity: 800 mAH, 3.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 56 Technical Information The FCC wants you to know! Telephone Line Problems Changes or modif ications to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner’s manual, could void your authority to operate this product. The equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 57 In the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference. If you cannot eliminate this type of interference, you need to change to a dif ferent channel. Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby T Vs and VCRs.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 58 Precautions! Important Safety Instructions Before you read anything else, please observe the following: When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 59 Telephone Line Outlets There are two types of phone outlets: More Than One Cordless Telephone If you want to use more than one cordless telephone in your home, they must operate on different channels. Press the channel key to select a channel that provides the clearest communication. Cordless Telephone Privacy Cordless telephones are radio devices.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 60 Index 0-9 3-way conferencing . . . . . . . . 30 E, F, G Earpiece volume . . . . . . . . . . . 18 A Adjusting the volume Answering device Features . . . . . . . Setting up . . . . . . Using . . . . . . . . . H Headset installation . . . . . . . . 50 . . . . . . . 18 . . . . . . . 39 . . . . . . . 40 . . . . . . . 44 B Batter y pack Preparing and charging. . . . . 10 Replacement and handling. . . 51 C Caller ID Caller ID service . . . . . . . . .
UC772EZ ENG(24-148) 10/9/01 15:28 Page 61 At Uniden, we´ll take care of you! If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters. Thank you for purchasing a Uniden product. Hours: M-F 7:00 AM to 7:00 PM CST.
UC772EZ ENG(24-148) 10/9/01 15:28 Page 62 Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,533,010 5,574,727 5,650,790 5,660,269 5,661,780 5,663,981 5,671,248 5,717,312 5,754,407 5,768,345 5,787,356 5,838,721 5,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082 6,125,277 © 2001 Uniden America Corporation, Fort Worth, TX All rights reserved.
