Specifications
69
Remotely Operating Your Answering Machine
You can access your answering machine while you are away from home to check, play, delete messages, or even
record a new greeting message or to turn your answering machine on and off.
To operate from a remote location, use any touch-tone telephone and follow these steps:
Call your telephone number and wait for the answering machine to answer. If the answering machine is off, it
will answer after about 10 rings and a series of beeping sounds.
During the greeting message (or a series of beeps when the answering machine is off), press
[0] and enter
your PIN code within 2 seconds (see "Setting a Security Code or Personal Identiî‚¿cation Number (PIN)" on
page 6
0).
The answering machine announces the current time and the number of messages stored in memory. You
hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep.
Enter a remote command within 15 seconds, each command there after must be entered within 2 seconds.
You may select a command from the following chart:
1)
2)
3)
4)