Operation Manual

31
Operation
• If the scanner picks up unwanted partial, or very
weak transmissions, turn Squelch clockwise to
decrease the scanner's sensitivity to these
signals. To listen to a weak or distant station,
turn Squelch counterclockwise.
• To ensure proper scanning, adjust Squelch until
the audio mutes.
Manually Selecting a Channel
You can continuously monitor a single channel
without scanning. This is useful if you hear an
emergency broadcast on a channel and do not want
to miss any details - even though there might be
periods of silence - or if you want to monitor a
specific channel.
To manually select a channel, press Hold/ , enter
the channel number then press Hold/ again.
Or, during scanning, if the radio stops at a channel
you want to listen to, press Hold/ once.
(Repeatedly pressing Hold/ at this time causes
the scanner to step through the channels.) Press
Scan/Src to resume automatic scanning.
UB340ZH Paper OM reduced size.fm Page 31 Monday, September 26, 2005 2:56 PM