Operation Manual

33
Special Features
• Close Call works better with some types of
transmissions than others. It might not correctly
display frequency information for transmitters
using a highly directive antenna (such as an
amateur radio beam antenna), if there are many
transmitters operating at the same time in the
same area, or if the transmitter is a broadcast
television station.
Setting the Close Call Options
1. Press Func then press and hold Hold/ for 2
seconds to enter Close Call mode. Then press
and hold Hold/ . One of the following Close
Call options appears.
C-C.bnd: Lets you select the Close Call band.
C-C.Alt: Lets you select the Close Call alert
settings.
2. Repeatedly press 2/ or 8/ to select the
option you want, then press E/Pgm.
If you selected C-C.bnd, one of the following
band names appears.
bnd Lo: VHF Low Band
bnd Air: AIR Low Band
bnd Hi: VHF High Band
bnd UHF: UHF Band
bnd 800: 800 MHz Band
If you selected C-C.Alt, skip to Step 5.
3. Repeatedly press 2/ or 8/ until the band you
want to search appears, then press E/Pgm to
select it.
Otherwise, press /Clr if you do not want to
select it. The scanner displays the following
options.
UB340ZH Paper OM reduced size.fm Page 33 Monday, September 26, 2005 2:56 PM