Operation Manual

34
Special Features
Lo On or Lo OFF: Lets you select the VHF Lo
frequency band.
Air On or Air OFF: Lets you select the Air
frequency band.
Hi On or Hi OFF: Lets you select the VHF Hi
frequency band.
UHF On or UHF OFF: Lets you select the UHF
frequency band.
800 On or 800 OFF: Lets you select the 800
MHz band.
4. Repeatedly press 2/ or 8/ until the option
you want appears, then press E/Pgm to select it.
Otherwise, press /Clr if you do not want to
select it. Then skip to Step 8.
5. Press E/Pgm while C-C.Alt appears. One of
the following alert options appears.
ALt bEEP: The scanner beeps when a Close
Call signal is detected.
ALt Light: The scanner flashes the display
backlight when a Close Call signal is detected.
ALt bP-Lt: The scanner flashes the display
backlight and beeps when a Close Call signal is
detected.
ALt OFF: The scanner does not provide any
alert when a Close Call signal is detected.
6. Repeatedly press 2/ or 8/ until the option
you want appears, then press E/Pgm to select it.
Otherwise, press /Clr if you do not want to
select it. Then skip to Step 8.
7. Repeatedly press 2/ or 8/ until the option
you want appears, then press E/Pgm to select it.
UB340ZH Paper OM reduced size.fm Page 34 Monday, September 26, 2005 2:56 PM