Operation Manual

Special Features

BAND PLAN 3

See page 9 for how to select the band from 1, 2 and

Chain Search Mode

Press Func + Scan/Src to start chain search mode.

SRCH, the enabled search bank number, and or

(indicating the search direction) appear. The search

bank number being searched flashes.

Press 0-9 to enable or disable the search bank

number being searched in this mode. Enabled bank

numbers appear. (Disabled bank numbers

disappear).

At least one search bank must be enabled. (The

scanner sounds an error tone if you try to disable all

the search banks). The search bank and the

frequency where chain search starts depends on

Bank

No.

Frequency (MHz) Step (kHz)

1 25.0000 - 29.9950 5

2 30.0000 - 87.2650 5

3 108.0000 - 136.9875 12.5/8.33

108.0000 - 136.9916 Selectable

4 138.0000 - 157.9950 5

5 158.0000 - 173.9950 5

6 406.0000 - 439.99375 6.25

7 440.0000 - 465.99375 6.25

8 466.0000 - 469.99375 6.25

9 470.0000 - 512.0000 6.25

10 806.0000 - 960.0000 12.5

UB340ZH Paper OM reduced size.fm Page 39 Monday, September 26, 2005 2:56 PM