Operation Manual

43
Special Features
1. Press Func + E/Pgm in direct entry search
mode or direct entry search hold mode. The
frequency and lowest blank channel alternate on
the display.
2. Press E/Pgm to store the frequency into the
blank channel. To select another channel,
repeatedly press Func + 2/ or Func + 8/ to
select the blank channel you want, then press E/
Pgm. You can also use the 0-9 keys to select the
bank.
If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated. If
you entered the frequency by mistake, press /Clr.
To enter the frequency anyway, press E/Pgm to
accept.
The scanner moves to program mode after you
stored the frequency.
Search Skip Memory
You can skip up to 100 specified frequencies during
a search. This lets you avoid unwanted frequencies
or those already stored in a channel.
Note: Search skip frequencies are shared by service
search, direct entry search, chain search and Close
Call modes. If skip frequencies are sent in certain
mode, the frequencies are also skipped in other
search modes and Close Call mode.
To skip a frequency, press Func and 0/L/O when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it is
not in hold.
UB340ZH Paper OM reduced size.fm Page 43 Monday, September 26, 2005 2:56 PM