Operation Manual

44
Special Features
Follow these steps to clear a single frequency from
skip memory so the scanner stops on it during a
search.
1. Press Hold/ to stop the search.
2. Press Func + 2/ or Func + 8/ to select the
frequency. L/O appears.
3. Press Func + 0/L/O. L/O disappears.
To clear all the skip frequencies at once while
searching or search hold, press Func then press
and hold 0/L/O until the scanner beeps.
Notes:
• If you selected all frequencies to be skipped
within the search range, the scanner beeps 3
times and does not search.
• If you select more than 100 frequencies to skip,
each new frequency replaces a frequency
previously stored, beginning with the first stored
frequency.
•Press Func + 2/ or Func + 8/ to select a
skipped frequency while Hold appears. L/O
appears when you select a skipped frequency.
Delay
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a specific
channel, you can program a 2-second delay into any
channel or frequency. The scanner continues to
monitor the channel frequency for an additional
2 seconds after the transmission stops before
resuming scanning or searching. The scanner
automatically sets a delay when you store
frequencies into channels or when you search
frequencies. When the delay feature is on, DLY
appears. If it is off, follow one of these steps to
UB340ZH Paper OM reduced size.fm Page 44 Monday, September 26, 2005 2:56 PM