Operation Manual

47
Special Features
Follow these steps to select a different channel in a
bank as the priority channel.
1. Manually select the channel you want to select
as the priority channel.
2. Press Func + E/Pgm, then press Func + 1/Pri.
P appears to the left of the selected channel
number.
3. Repeat Steps 1 and 2 for the channel in each
bank you want to program as a priority channel.
To turn on the priority feature, press Func + 1/Pri
during scanning. PRI appears. Then the scanner
checks the designated priority channel every
2 seconds in each bank.
To turn off the priority feature, press Func + 1/Pri.
PRI disappears.
Using Keylock
Use the scanner's keylock to protect it from
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
Scan/Src, Func, Hold/ , / , and .
To turn on keylock, press Func + / .
appears. To turn off keylock, press Func + / .
disappears.
Note: Using keylock does not prevent the scanner
from scanning channels.
Using the Display Backlight
To turn on the display light for easy viewing at night,
press / . The display lights for 15 seconds. To
turn off the light sooner, press / again.
UB340ZH Paper OM reduced size.fm Page 47 Monday, September 26, 2005 2:56 PM