Operation Manual

22
4. The scanner displays Charging while it charges the
batteries and Charge Complete when the Ni-MH batteries
are completely charged.
Di erent status messages may display depending on the
battery type and scanner status:
LCD Message Batt.
Type
Meaning Scanner
Cond.
Charging
Ni-MH Scanner is charging. Off
No Battery
None NO batteries in
scanner.
Off
Charge
Complete
Ni-MH Unit is charged. Off
Charge Off
Alk./Ni-
MH
Scanner is not charg-
ing (Battery selection
switch is set to Alk.)
Off
Battery Error
Ni-MH Batteries cannot
be charged (dead
battery).
Off
Illegal Voltage
Ni-MH USB external power
is out of range.
Off
See also Setting the Charging Timer, page 32.
If the batteries are good, the scanner charges the batteries.
and it operates normally. If the scanner cannot immediately
determine if the batteries are good and can be charged, it checks
them and displays the battery icon. If the scanner judges the
batteries are good, the scanner starts charging and the battery
icon disappears. If it cannot regard the batteries as good in 60
seconds, the scanner stops checking and the battery icon blinks.
UB374ZV_UBC125XLT_130329.indd 22UB374ZV_UBC125XLT_130329.indd 22 2013/03/29 10:34:512013/03/29 10:34:51