Operation Manual

Adjusting the Volume

1. Press SCROLL CONTROL; The volume level indicator and

battery voltage display.

2. Turn SCROLL CONTROL to adjust the volume level from 0

to 15.

3. Press SCROLL CONTROL to set the volume.

4. To exit Volume Level mode, press SCROLL CONTROL

again or wait 10 seconds to return to the previous mode.

Adjusting the Squelch

1. Press Func, then press SCROLL CONTROL. The squelch

level indicator and battery voltage appears.

2. Turn SCROLL CONTROL to change the squelch level from

0 to 15.

3. Turn SCROLL CONTROL until the audio mutes. If the

scanner picks up unwanted partial signals or very weak

transmissions, increase the Squelch setting to increase the

signal level required to open squelch. To listen to a weak or

distant station, decrease the Squelch setting.

4. Press SCROLL CONTROL to set the desired level and return

to the previous mode.

Setting the Backlight

Press

to turn on the backlight on and o .

1. Press Func and

to view the Display/Charge menu.

2. From this menu, scroll to Set Backlight from the

submenus. Press SCROLL CONTROL.

UB374ZV_UBC125XLT_130329.indd 30UB374ZV_UBC125XLT_130329.indd 30 2013/03/29 10:34:532013/03/29 10:34:53