Operation Manual

35
Note 2: You can quickly store frequencies in Scan Hold mode
by entering the frequency and pressing Pgm/E.
3. Scroll to highlight Enter Frequency and press Pgm/E. You
will see the channel number and currently programmed
frequency. (To return to the previous screen, press . Clr.)
4. Use number keys and . Clr for a decimal to enter the
frequency. If you make a mistake, press . Clr to clear the
display. Press Pgm/E to store the frequency and return to
the Channel menu.
5. Press . Clr to return to the last screen.
The scanner automatically rounds the entered number to the
nearest valid frequency. For example, if you enter 151.473 (MHz),
your scanner accepts it as 151.475.
If you entered an invalid frequency, Out of Band appears and
the scanner beeps three times. Press . Clr and enter a valid
frequency. If you enter a frequency that has already been
entered elsewhere, the scanner displays the channel number
and Frequency Exists – Confi rm? appears.
If you entered the frequency by mistake, press . Clr then enter
the correct frequency. To enter the frequency anyway, press
Pgm/E to accept.
The channel belong to same bank is displayed, then the smallest
channel is displayed when two or more duplication channels
exist.
UB374ZV_UBC125XLT_130329.indd 35UB374ZV_UBC125XLT_130329.indd 35 2013/03/29 10:34:542013/03/29 10:34:54