Operation Manual

36
PROGRAMMING CHANNEL TEXT TAGS
You can customize your channels by programming text tags
(up to 16 characters in length) for easier channel frequency
identi cation. The default tag is the bank number followed by
the channel number in the bank.
1. To select a channel, press Hold and then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also
press Hold and scroll to the channel; press Func then
Pgm/E.)
3. Scroll to select Edit Tag and press Pgm/E.
4. Turn SCROLL CONTROL to choose the characters, pressing
> or < to move the cursor to the right or left. If you make a
mistake, press . CLR to clear the last character. Press . CLR
twice to clear all characters. To cancel and exit, press L/O.
5. Press Pgm/E to save the tag and return to the Channel
menu.
SETTING CTCSS/DCS FOR A CHANNEL
You can store a CTCSS tone or DCS code, set the scanner to
search for tones/codes, have the scanner open squelch on any
tone/code, or have the squelch only open if no CTCSS/DCS is
detected for any channel. (Default = O )
1. To select a channel, press Hold and then enter the channel
number.
2. Press Pgm/E to enter the Channel menu. (You can also press
HOLD and scroll to the channel; press Func then Pgm/E.)
UB374ZV_UBC125XLT_130329.indd 36UB374ZV_UBC125XLT_130329.indd 36 2013/03/29 10:34:542013/03/29 10:34:54