Operation Manual

45
2. Press and hold L/O until Confi rm Unlock All Channels?
appears in the display.
3. Press Pgm/E to unlock all or . Clr to cancel.
SERVICE SEARCH MODE
If you do not have a reference to frequencies in your area, use
a search to  nd a transmission. You can search for Emergency,
Freenet, PMR, Marine, Aircraft, CB radio and HAM radio
frequencies without knowing the speci c frequencies used
in your area. The scanner is preprogrammed with all the
frequencies allocated to these services.
To start a Service Search, press Func then Srch/Svc. When
the scanner  nds a transmission, it stops on it. When the
transmission ends, the scanner resumes searching according to
the delay setting (see page 50).
During a Service Search, the upper line displays the current
service name. The lower line displays the search frequency and
the direction indicator (↑or ↓) with the modulation.
Enabled service banks appear on the lowest line. Disabled
service bank numbers are not displayed. The currently searched
bank number  ashes. You can turn service banks on/o by using
1-7; however, one service bank must always be enabled. If you
turn o all service banks, the scanner will display Nothing to
Srch.
If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn the
SCROLL CONTROL or press Func then Srch/Svc.
UB374ZV_UBC125XLT_130329.indd 45UB374ZV_UBC125XLT_130329.indd 45 2013/03/29 10:34:542013/03/29 10:34:54