Operation Manual

Unlocking all Search Frequencies

1. Press Func then Pgm/E in any Search or Search Hold

mode to view the Search menu.

2. Scroll to Review Lockouts and press Pgm/E.

3. Scroll to Unlock All and press Pgm/E. Then Conﬁ rm Unlock

All Frequencies? appears.

4. Press Pgm/E to con rm or .Clr to cancel.

Also, you can unlock all search/Close Call frequencies, press and

hold L/O in any Search Hold mode until the scanner prompts

Conﬁ rm Unlock All Frequencies?.

Press Pgm/E to con rm or .Clr to cancel.

Setting Step Frequency

You can change the steps of each band. Selected step a ects

both search and Close Call.

For air band, selected step also a ects air service search.

1. Press Func then 3/Step to step frequency menu while

holding the frequency.

2. The scanner displays the current steps.

3. Turn SCROLL CONTROL to select steps from Default, 5kHz,

6.25kHz, 10kHz and 12.5kHz. (for air band, 8.33kHz or

12.5kHz) (for 84.015 - 88 MHz band, 20kHz step is added)

4. Press Pgm/E to select and then return previous mode.

Also, you can set Step Frequency by Search Menu.

Note: If the scanner is turned o , step frequency is set to initial setting.

UB374ZV_UBC125XLT_130329.indd 54UB374ZV_UBC125XLT_130329.indd 54 2013/03/29 10:34:552013/03/29 10:34:55