Operation Manual

58
• Press any key (other than Hold) to view the displayed
frequency.
While monitoring a Close Call transmission, the scanner displays
Close Call on  rst line and the monitoring frequency on the
second line.
The modulation and any CTCSS/DCS received (if enabled) will
also appear on the display.
Numbers at the bottom of the display show the enabled Close
Call bands. The currently searched band number  ashes.
When the transmission ends, the scanner resumes searching
according to the delay setting.
To hold on a frequency, press Hold.
To start a Quick Search at the current frequency, turn the
SCROLL CONTROL in Hold mode and press Hold to start
searching.
To cancel the hit, turn the Scroll Control.
To temporarily lock out a frequency, press L/O.
To permanently lock out a frequency, press L/O twice quickly.
To store a frequency, press Pgm/E. See Storing Found Search
Frequencies on page 52.
To exit Close Call Only mode, press Scan.
The following paragraphs describe Delay, CTCSS/DCS, Alert
Settings, Setting Close Call Bands, and reviewing/unlocking
frequencies.
UB374ZV_UBC125XLT_130329.indd 58UB374ZV_UBC125XLT_130329.indd 58 2013/03/29 10:34:552013/03/29 10:34:55