Operation Manual

60
• Alert Light - Controls whether the scanner  ashes the
display backlight when Close Call detects a signal.
• Back - returns to previous menu.
3. Scroll to any option you want to enable/disable and press
Pgm/E.
4. Scroll to On or Off and press Pgm/E
5. Press .Clr (or scroll to Back and press Pgm/E) to return to
the Close Call menu.
Close Call Hits Bank
The scanner saves the last 10 Close Call hits into the Close Call
temporary store bank named “Close Call Hits.”
This setting turns the bank on or o during Scan mode. (Default
= O )
1. Press Func then Hold to view the Close Call menu.
2. Scroll to Scan Hits and press Pgm/E.
3. Scroll to Scan Hits On or Off and press Pgm/E to save and
return to the Close Call menu. (Default = O )
You can also store these temporary frequencies into channel
storage banks when you receive them in Scan mode and scroll
to them in Scan Hold mode.
See also Storing Found Search Frequencies on page 52.
Close Call Delay
This setting controls how long the scanner stays on the
frequency after a transmission ends before resuming Close Call
operation. If you select a minus delay time, the scanner stops
UB374ZV_UBC125XLT_130329.indd 60UB374ZV_UBC125XLT_130329.indd 60 2013/03/29 10:34:552013/03/29 10:34:55