UBC360CLT handleiding HANDLEIDING
Voorzorgsmaatregelen Let, voor u deze gebruikershandleiding leest, op het volgende: Wijzigingen aan het product die niet uitdrukkelijk zijn goedgekeurd door Uniden, of gebruik van dit product op een andere manier dan in deze handleiding is beschreven, kan er toe leiden dat uw garantie vervalt. Het installeren, bezitten of gebruiken van deze scanradio in een motorvoertuig kan in sommige landen, steden en lokale gebieden verboden of gereguleerd zijn. Ook kan daarvoor toestemming vereist zijn.
Inhoudsopgave Voorzorgsmaatregelen ................................................................................................... 2 Wat zit er in de doos? ..................................................................................................... 5 Introductie ...................................................................................................................... 6 Eigenschappen .....................................................................................................
Een geheugen selecteren.......................................................................................... 24 Geheugenbanken scannen ....................................................................................... 24 Geheugens in‐ en uitsluiten ...................................................................................... 25 Het gebruik van de Prioriteitsscan functie................................................................ 25 Kanaalvertraging instellen ..........................
Wat zit er in de doos? Pak de doos voorzichtig uit en vergewis u ervan dat deze de volgende onderdelen bevat: Telescoopantenne Scannerradio handleiding informatie AM Lusantenne AC‐Adapter 3 AA Alkalinebatterijen 5
Introductie Uw scannerradio is een veelzijdige scanner. U kunt gemakkelijk frequenties van politie, brandweer/hulpverlening, marine, luchtvaart, amateur‐ en andere radiodiensten binnen het 300 kanalen geheugen op 10 banken opzoeken en opslaan.
Eigenschappen Kanaalgeheugen scannen Scant frequenties die u heeft opgeslagen in een van de kanalen of banken. Maximaal 50 kanalen per seconde. Geheugen Sla tot 300 kanalen op in 10 banken en scan ze stuk voor stuk. Directe kanaaltoegang Druk op 0 – 9 en HOLD om direct naar een opgeslagen frequentie te gaan. Kanaal/Frequentie uitsluiten Sla opgeslagen frequenties (kanalen) over met behulp van de uitsluitingmogelijkheid. Dit versnelt het scannen.
Zoek luchtvaartkanalen Scan‐ en zoeksnelheid Hiermee kunt u voorgeprogrammeerde Luchtvaartkanalen instellen die afgezocht worden. ‐ ‐ ‐ Scansnelheid Maximaal 50 kanalen per seconde in SCAN modus. Zoeksnelheid Maximaal 50 stappen per seconde in SEARCH modus. TURBO MODE Voor frequentiestappen die 5kHz uit elkaar liggen kunt u in de turbomodus maximaal 150 stappen per seconde uitvoeren. Klokweergave In standby modus wordt de klok getoond.
Automatisch afsluiten batterij bevat, klinkt een geluid wanneer de batterij vervangen moet worden. De backup biedt een geheugenbackup gedurende de tijd wanneer het apparaat uit is en zal korte tijd krachtig scannen. Schakelt het apparaat uit wanneer de batterij te weinig vermogen heeft.
Bedieningsknoppen Scanner 10
1. Volumeknop – Hiermee kunt u het volume regelen. 2. SQUELCH‐knop – Hiermee stelt u de signaal/ruis verhouding mee in die nodig is om een uitzending te ontvangen. Wanneer u de knop helemaal open draait, hoort u ook zwakke uitzendingen en ruis tijdens de uitzendingen. U ontvangt dus zwakke signalen, en veel ruis. Wanneer u de knop dicht draait, ontvangt u alleen de heldere signalen.
‐ Gebruik een numerieke knop om een kanaal te wijzigen d.m.v. de Directe Kanaaltoegangsfunctie ‐ Gebruik een numerieke knop tijdens het scannen om de gerelateerde scanningbank geheugenbands in‐ of uit te schakelen 10. Power ‐ Gebruik deze knop om het apparaat in‐ en uit te schakelen. De tijd wordt weergegeven wanneer het apparaat is uitgeschakeld (standby modus). 11. ./CLR – Deze knop heeft drie functies: ‐ Gebruik de knop om een decimaal teken in te voeren wanneer u een frequentie intoetst.
frequenties te bladeren in de ‘Beperkt zoeken’‐modus en AM/FM‐modus. Gebruik hierbij de frequentie en stappentabel op pagina 7. Druk op de knop en houdt deze langer dan een seconde in om continu te bladeren. 19. S ‐ Gebruik deze knop en houdt deze in om naar boven te bladeren door de kanaalnummers in de volgende HOLD modi: SCAN, PROGRAM en Luchtvaartbandzoeker Ook kunt u deze knop gebruiken om door de frequenties te bladeren in de ‘Beperkt zoeken’‐modus en AM/FM‐modus.
LCD 1. BANK – Geeft de scan modus en scan hold modus weer 2. 1‐10 – Geeft de scan modus, programmeringmodus en radiomodus weer. Bij de scanmodus wordt de geselecteerde bank weergegeven. De huidige scanbank wordt knipperend weergegeven. In radiomodus wordt het radiostation weergegeven. 3. – Knippert wanneer het batterijvermogen laag is. Geeft aan of er een batterij geplaatst is of niet. 4. STEP – Geeft het ‘Select Step Menu’ weer. 5. SEARCH – Geeft aan of het apparaat in beperkte zoekmodus (hold) is. 6.
10. L/O – Geeft aan of een kanaal is uitgesloten. Wordt ook weergegeven wanneer tijdens het zoeken een frequentie wordt overgeslagen. 11. – Geeft aan dat het weergegeven kanaal een prioriteitskanaal is 12. DELAY – Geeft aan dat vertraging is ingeschakeld 13. MEMORY – Geeft radiomodus weer (geheugenmodus) 14.
De scanner installeren Deze richtlijnen helpen u met de installatie en het gebruik van uw nieuwe scanner: ‐ Wanneer uw scanner stoort of elektrisch geluid laat horen, verplaats dan de scanner of de antenne van de storingsbron. U kunt ook de hoogte of hoek van de antenne bijstellen. ‐ Gebruik eventueel een mono‐oortelefoon of headset met goede impedantie om individueel te luisteren. ‐ Gebruik de scanner niet in vochtige omgevingen zoals de keuken of badkamer.
lekken en daardoor elektronische circuits vernietigen. ‐ Gebruik geen oude en nieuwe batterijen door elkaar. Gebruik ook geen verschillende soorten batterijen (standaard, alkaline, oplaadbaar) door elkaar. Gebruik geen oplaadbare batterijen met verschillende capaciteiten door elkaar. De batterijen zijn bedoeld als backup voedingsbron voor de klok en voor de scanner, gedurende korte tijd. Wanneer het vermogen van de batterijen te laag wordt verschijnt het icoontje. Verplaats dan direct de batterijen.
Opgelet: Volg alle veiligheidswaarschuwingen die bij de antenne geleverd worden. Doet u dat niet, dan kunt u blootgesteld worden aan risico’s op verwondingen of dood en kunt u de scanner ernstig beschadigen. Het achtergrondlicht gebruiken Om het achtergrondverlichting gedurende 15 seconden te gebruiken, drukt u op SNOOZE/Backlight. Wilt u het achtergrondverlichting permanent aanhouden, houdt de knop dan 2 seconden ingedrukt. Om het licht uit te schakelen houdt u de knop weer 2 seconden ingedrukt.
De alarmklok instellen Volg onderstaande stappen om de alarmtijd in te stellen: 1. Verplaats de schakelaar naar Alarm Set. U ziet nu de uren knipperen. 2. Gebruik S of T om het uur met 1 uur naar boven of beneden te wijzigen of gebruik de numerieke knoppen om het huidige uur in te voeren. Druk vervolgens op E/PGM om het uur in te stelen. Nu knipperen de minuten. 3. Gebruik S of T om de minuten met 1 minuut naar boven of beneden te wijzigen.
Luisteren naar AM/FM kanalen Om naar AM/FM kanalen te luisteren, schakelt u in op AM/FM. Druk daarna op de knop bovenaan de scanner om de gewenste bron (AM, FM1 of FM2) te selecteren. Direct een kanaal selecteren Druk op STEP/DIR om direct uw kanaal in te voeren. Gebruik de S/T knoppen om door de geselecteerde band te bladeren. De scanner stopt bij actieve kanalen. U kunt ook de gewenste frequentie invoeren met behulp van de numerieke knoppen. Voer een frequentie in (voor FM of AM) en druk op E.
Wilt u snel een kanaal oproepen, selecteer dan de band en vervolgens de Geheugenmodus door op PRI/MEM te drukken. Toets vervolgens het nummer in waarachter u het gewenste kanaal hebt opgeslagen.
Het gebruik van het scannergeheugen Uw scanner heeft 300 geheugenplaatsen waarin u scanfrequenties kunt opslaan. Het geheugen is onderverdeeld in 10 geheugenbanken met elk 30 geheugenplaatsen. Terwijl u scant kunt u snel selecteren welke bank u wilt scannen door het nummer van geheugenbank in te toetsen. Om de scannermodus te selecteren zet u de schakelaar op Scanner. Geheugen programmeren Om het geheugen te programmeren is het handig dat u eerst vaststelt welke frequenties u wilt opslaan.
20 21 22 23 24 25 26 27 28 29 30 20 21 22 23 24 25 26 27 28 29 30 Bank 6 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 20 21 22 23 24 25 26 27 28 29 30 Bank 7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 20 21 22 23 24 25 26 27 28 29 30 Bank 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Bank 9 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 23 20 21 22 23 24 2
Volg, wanneer u de bovenstaande tabel heeft ingevuld, de volgende stappen om een frequentie in het geheugen op te slaan of te wijzigen: 1. Druk op E/PGM om naar de programmeringmodus te gaan. Op de scanner verschijnt het PGM‐icoontje. 2. Wanneer u niet het huidige kanaal wilt programmeren, voer dan het geheugennummer in en druk op HOLD. 3. Voer de frequentie in, inclusief de decimale punt. Druk vervolgens op E/PGM. 4. Wilt u het vorige of volgende geheugen vullen, gebruik dan S of T en herhaal stap 3.
uitschakelen tijdens het scannen, druk dan op de numerieke knop die correspondeert met de geheugenbank die u wilt in‐ of uitschakelen. Geheugens in en uitsluiten U kunt geheugens uitsluiten zodat zij niet worden gescand, ook niet wanneer de betreffende geheugenbank actief is. Om een geheugen uit te sluiten, drukt u op de L/O knop wanneer de scanner stopt bij een frequentie waarop uitgezonden wordt. U kunt ook handmatig een geheugen selecteren en daarna op L/O drukken.
Kanaalvertraging instellen U kunt instellen dat de scanner 2 seconden wacht aan het eind van een beluisterde uitzending op een opgeslagen kanaal. Dit is handig om gemiste uitzendingen te voorkomen. De vertraging is standaard ingesteld wanneer u een geheugen programmeert. Om de vertraging in‐ of uit te schakelen selecteert u eerst het kanaal. Druk daarna op DELAY. De scanner geeft het DELAY‐icoontje weer voor geheugens waarop de vertraging is ingeschakeld.
Zoeken naar actieve frequenties Veel mensen vinden het leuk om te zoeken naar onbekende frequenties die in hun regio gebruikt worden maar die niet openbaar bekend zijn. De scannerradio heeft twee manieren om te zoeken: een beperkte zoekfunctie die zoekt tussen twee ingestelde frequenties en een optie om uitzendingen van uit de luchtvaart te scannen. Gebruik van de beperkte zoekfunctie Instellen van de laagste en hoogste frequentie Volg de volgende stappen om een laagste en hoogste frequentie in te stellen.
Gebruik SEARCH of S en T om te naar vliegverkeer te zoeken wanneer het zoeken op een frequentie stopt. De zoekrichting kan worden gewijzigd met S en T. De scanner blijft de huidige frequentie ontvangen wanneer de holdmodus is ingeschakeld, ongeacht of er uitzendingen op de frequentie zijn of niet. Wanneer er echter geen uitzending is, wordt de luidspreker uitgeschakeld. Door HOLD in te drukken in de luchtvaartzoekmodus stopt het zoeken en de scanner gaat naar de holdmodus.
Blader vervolgens handmatig naar de frequentie met behulp van de S‐ en T‐ knoppen. Druk, wanneer u de frequentie geselecteerd heeft, op L/O.
Stappen selecteren De gebruiker kan de stappen van iedere band in het ‘Select Step Menu’ wijzigen wanneer de MODE‐schakelaar is gewijzigd van “Aircraft” naar “Scanner”. De volgende tabel toont de optionele bands en stappen. Onderneem de volgende stappen om de stap te wijzigen. Stap 1: Ga naar het ‘Select Step Menu’ door STEP in te drukken in scan (hold) modus, beperkte zoek (hold) modus en luchtvaartzoek (hold)modus. Stap 2: Druk op BAND en vervolgens op S of T om de band te wijzigen.
Stap 3: Druk op STEP en vervolgens op S of T om de Stap te kiezen en vast te leggen. Wanneer u S of T ingedrukt houdt, bladert u automatisch verder. Door op CLR te drukken kunt u de stap wijzigen in de vorige stap die naar het stapmenu gaat. Stap 4: Druk op ENT om naar de vorige modus te gaan of wacht 5 seconden om terug te gaan naar de modus waarin u al was. Druk op SCAN om naar de scanmodus te gaan. Druk op SEARCH om naar de zoekmodus te gaan.
Zorg en onderhoud Algemeen gebruik ‐ ‐ ‐ Zet de scanner uit voordat u de adapter of batterijen verwijderd. Wanneer het geheugen gewist is, kunt u dit herstellen door alle kanalen te herprogrammeren. Druk altijd stevig op de knoppen tot u een geluid hoort waarmee het indrukken van de knop bevestigd wordt. Locatie ‐ ‐ ‐ ‐ Gebruik de scanner niet in vochtrijke omgevingen zoals keukens en badkamers.
van de scanner. Gebruik L/O om het kanaal uit te sluiten. De scanner scant zichzelf als het ware.
Technische specificaties Banddekking: Frequentiebereik: Scannermodus 15 Bands Bereik (MHz) 25.0000 – 29.9950 30.0000 – 79.9950 80.0000 – 82.9950 83.0000 – 87.2950 108.0000 – 136.9950 137.0000 – 137.9950 138.0000 – 157.9950 158.0000 – 160.5950 160.6000 – 162.5950 162.6000 – 173.9950 406.0000 – 439.9950 440.0000 – 465.9950 466.0000 – 469.9950 470.0000 – 512.0000 * 806.0000 – 960.0000 Standaard stap 5 kHz 12.5 kHz 10 kHz 12.5 kHz 12.5 kHz 5 kHz 12.5 kHz 10 kHz 12.5 kHz 10 kHz 6.25 kHz 5 kHz 10 kHz 6.
Kanalen: Scansnelheid: Zoeksnelheid: Tijdaccuratesse: (25°C ± 5°C) Audio uitvoer (normaal): Stroomvereisten: Antenne: Externe aansluitingen: Accessoires: Speaker: Bedieningstemperatuur: Opslagtemperatuur: Afmetingen (lxbxh): Gewicht: 300 (30 kanalen x 10 banken) 50 kanalen per seconde 50 stappen per seconde +/‐ 20seconden per maand bij normale temperatuur 0.
Verklaring van overeenstemming Wij, Uniden Corporation 2‐12‐7 Hatchobori Chuo‐Ku, Tokyo 104‐8512 Japan Verklaren, onder eigen verantwoordelijkheid, dat dit apparaat: Uniden Bearcat model UBC360CLT overeenkomt met de essentiele vereisten en andere relevante bepalingen van de Raadsrichtlijn 1999/5/EC.
Aantekeningen 37
DANK U WEL VOOR DE AANSCHAF VAN DIT UNIDEN PRODUCT! 38