Operation Manual

STEP 3:

Press STEP, and then press ▲, ▼ to change the step and decide it.

Holding ▲ or ▼ to change the step continuously.

By pressing CLR, you can change the step into previous step that goes to

step menu.

STEP 4:

Press ENT to go to previous mode.

Or wait for 5 seconds to return to the mode you were in.

Press SCAN to go to scan mode.

Press SEARCH to go to search mode.

Move the MODE slide switch to “Aircraft” to go to Aircraft (Hold) mode.

Move the MODE slide switch to “AM/FM” to go to AM/FM radio mode.

Notes:

• The all lockout frequencies of the band automatically can be unlocked

when the step is changed at the Band.

• The frequency can be programmed by 5kHz step even though the

step is set up to 15kHz or 20kHz.

Select Step Operation

UB355ZH(UBC360CLT).indd 26 2008/04/08 15:56:06