Operation Manual

Connect an Optional Earphone/Headphone

For private listening, you can plug a 1/8-inch (3.5 mm) mini-

plug earphone or stereo headphones (not supplied) into the

headphone jack on top of your scanner. This automatically

disconnects the internal speaker.

Connecting an Optional Extension Speaker

In a noisy area, an optional extension speaker, positioned in

the right place, might provide more comfortable listening.

Plug the speaker cable’s 3.5-mm mini-plug into your

scanner’s jack. If your speaker’s cable ends in a mono plug,

use a mono-to-stereo adapter to prevent shorting the audio

ampli er and reducing volume.

WARNING! If you connect an external speaker to the

scanner’s headphone jack, never connect the audio

output line to a power supply and ground. This might

damage the scanner.

Adjusting the Belt Clip

The factory-attached belt clip makes it easier to carry the

scanner. Use a Phillips screwdriver to adjust (loosen) the

mounting screws or remove the belt clip completely.

POWERING THE SCANNER

Use the provided USB cable to connect your scanner to your

computer to charge the Ni-MH batteries on initial installation

and to recharge them. You can also use a power adapter

that provides USB charge power (not included, but available

at many retailers). You can also use alkaline (ALK) non-

rechargeable batteries (not included).

UBC75XLT_UB372BV_20130401.indd 19UBC75XLT_UB372BV_20130401.indd 19 2013/04/02 11:08:342013/04/02 11:08:34