Operation Manual

22
3. Connect the other end of the USB cable to the
computer’s USB port or to an AC or DC adapter that
provides USB charging power.
Note: If you connect to a computer’s USB port, the PC will
prompt you for the drivers for your scanner
. USB drivers and
optional programming software are available for download
from http://www.butel.nl/ubc75xlt . These will also be available
on the CD’s with ARC75 Software.
4. The scanner displays CHArg and the low battery icon
while it charges the batteries. The screen goes blank
after the scanner is completely charged.
Di erent status messages may display, depending on the
battery type and scanner status:
LCD Message Batt.
Type
Meaning Scanner
Cond.
CHArg Ni-MH Scanner is charging. Off
None Ni-MH Unit is charged. Off
None Ni-MH Scanner is not
charging (Battery
selection switch is
set to Alk.)
Off
Err CHArg Ni-MH Batteries cannot
be charged (dead
battery).
Off
ILEgAL Ni-MH USB external power
is out of range.
Off
UBC75XLT_UB372BV_20130401.indd 22UBC75XLT_UB372BV_20130401.indd 22 2013/04/02 11:08:342013/04/02 11:08:34