Operation Manual

Unlock Permanent Lock Out

To unlock a permanently locked-out frequency/channel:

1. Manually enter the frequency/channel then press Hold.

The frequency and lockout status display.

2. Press L/O until the lockout status no longer displays.

3. Press Hold again to return to Scan or Search modes.

To unlock all registered channels in enabled banks, press

Hold to stop scanning, then press and hold L/O until the

scanner beeps twice and

CLEAr displays.

Notes:

• Locked-out frequencies are shared between Service Search,

Custom Search, Quick Search, and Close Call modes. If

locked-out frequencies are set in a speci c mode, those

frequencies are also skipped in other Search and Close Call

modes.

• If you selected all frequencies in a search band to be

skipped, the scanner beeps 3 times and does not search.

• You can skip 100 frequencies for Temporary Lockout and

100 frequencies for Permanent Lockout (200 locked-out

frequencies total). After locking out 200 frequencies, the

next time you try to select a frequency to skip the scanner

displays

Full and will not lock out that frequency.

• If you want to  nd your locked-out frequencies, press Hold

and then turn the scroll control knob to cycle through

the frequencies. L/O or T/LO displays on the locked-out

frequencies.

UBC75XLT_UB372BV_20130401.indd 42UBC75XLT_UB372BV_20130401.indd 42 2013/04/02 11:08:362013/04/02 11:08:36