Operation Manual

44
DELAY
Sometimes a user might pause before replying to a
transmission. To avoid missing a reply on a speci c channel,
you can program a 2-second delay into channels or searches.
The scanner continues to monitor the channel frequency for
an additional 2 seconds after the transmission stops before
resuming scanning or searching.
Mode Delay Speci cation
Scan Each channel can be set individually.
Search Custom Search: If one range is set, all
ranges are set.
Service Search: Each band can be set as a
unit.
Quick Search
and Close Call
Changes made to Delay assignment in one
mode are reflected in the other mode.
When the delay feature is on,
DLY displays. If it is o , follow
one of these procedures to program a delay depending on
how the scanner is operating.
• If the scanner is scanning and stops on an active
channel where you want to program a delay, quickly
press Func + Dly before it continues scanning again.
DLY appears.
• If the desired channel is not selected, manually select
the channel, then press Func + Dly. DLY appears.
• If the scanner is searching, press Func + Dly. DLY
appears and the scanner automatically adds a 2-second
delay to every frequency it stops on in that band.
UBC75XLT_UB372BV_20130401.indd 44UBC75XLT_UB372BV_20130401.indd 44 2013/04/02 11:08:372013/04/02 11:08:37