Operation Manual

To turn o the 2-second delay, press Func + Dly while the

scanner is monitoring a channel, scanning, or searching.

DLY

disappears.

STEP FREQUENCY

You can change Step Frequency. The scanner have some

steps as 5.0/6.25/8.33/10.0/12.5/20.0 kHz and Default. Step

Frequency is applied in Quick Search, Custom Search, AIR

Service Search, and Close Call. Step Frequency is stored every

each Band Coverage.

1. Press Func + Step, then indicates current Step

Frequency. And

disappears, PGM appears.

2. Select a Channel Step by Scroll Control knob. (for AIR,

8.33kHz or 12.5kHz) (for 84 - 88 MHz in Band Plan 1 / for

84.015 - 87.295 MHz in Band Plan 2, 20kHz step is added)

3. Press E or scroll Control knob, then the Step Frequency

is inputted.

Notes :

• Press L/O or .Clr if you cancel this function when displays

Step Frequency.

• If you wants to set default Step Frequency for current Band,

select

dEFULt.”

• If the scanner is turned o , step frequency is set to initial

setting.

MODULATION TYPE

You can change Modulation Type. Modulation Type

is applied in Quick Search, Custom Search, CB Service

Search, HAM Service Search, and Close Call. Modulation

Type is stored every each Band Coverage. And every

UBC75XLT_UB372BV_20130401.indd 45UBC75XLT_UB372BV_20130401.indd 45 2013/04/02 11:08:372013/04/02 11:08:37