User`s manual

4
Getting Started
Connect the Power
Connect one AC adapter to the receiver’s power input (all the AC adapters are exactly the same).
Attach an antenna to the rear of each
camera and connect an AC adapter to
the camera’s power input pigtail. (If
necessary, connect the extension cord
to the camera’s pigtail and connect the
AC adapter to the extension cord.)
Connect the other end of each adapter to a
120 volt AC (standard indoor) power outlet,
and press the POWER button on the front of
the receiver or on the remote control.
Make sure the Power status lights on the front of
the receiver and each camera all turn on.
If... Try...
a Power status
light doesn’t
come on
reconnecting the AC adapter
seeing if the power outlet is
controlled by a wall switch
-
-
1.
2.
3.
4.
Registration Name: Registration Code: Registration Name: Registration Code:
voyants
Statut de
mise en/hors
fonction
POWER button
voyants
Statut de
mise en/hors
fonction
POWER button