Owner`s manual

16
UNIDEN Model uh710sx/uh720sx UHF CB Radio
OPERATION
Open Scan (OS) Mode
(the absence of GS icon indicates that the unit is on OS mode)
Allows continuous scanning of channels stored in the Open Scan (OS)
memory.
If an active channel is found, scanning will stop on that channel.
 Thefactoryhaspreprogrammedallthe40UHFchannelsinto
 theOpenScanchannelmemory.However,youcanchangeor
customise the channels by following the steps on programming
Scan Channels on page 18.
Example. CH40 becomes active
If the received signal cease, the unit will
wait for at least 3 seconds for the signal to
return, otherwise scanning resumes.
To skip the active channel, press or . Scanning resumes.
To deactivate SCAN, press or
CALL
SCAN
.
1. If SCAN is deactivated while in an active channel, the radio
will stay on that active channel. If no other channels are
active, the radio will reinstate the starting channel.
2.IfOSScanningisinitiatedwhentherearenochannels
programmedinOSmemory,anerrortonewillbeheardand
scanning will not start.