Manualshelf

Owner`s manual

ManualsBrandsUniden ManualsRadioUH8060NB
12345678910
Mounting the MIC Hanger
10
UNIDEN UH8080NB UHF CB Transceiver
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the MIC Hanger using the supplied binding screws.
Locate a suitable mounting position.
ApplyhighqualityDouble-SidedtapeontotheatareaoftheMICHanger
backpieceandthenpressrmlytothemountingposition.
The Microphone Hanger comes in two parts. How and where you mount the MIC
hanger will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the MIC Hanger only.
Locate a suitable mounting position and mark and drill two 3mm holes.
Fix the MIC Hanger into place with screws.