Owner`s manual

Mounting the MIC Hanger
11
UNIDEN UH8080NB UHF CB Transceiver
MIC Hanger mounted over MIC Cable
NOTE
The curly cord of the Remote LCD Speaker MIC can extend up to 1.5m.
For practical installation of the MIC Hanger mounted over MIC Cable use
this method with the Extension Cable.
Microphone
Radio
Extension Cable
2
1
5
4
3
The plug of the extension cable connects to the Radio. The socket end of the extension
cable connects with the microphone plug.
1. The rubber collar (dust cover) on the microphone cable is not required and can be
cut away or pushed out of the way along the cable.
2. Drill a 13mm hole at the MIC hanger location.
3. Thread the microphone plug through the hole and connect with the extension cable.
4. Mount the MIC Hanger over the hole and cable.
5.AttheRadio:ConnecttheextensioncableplugtotheMICJack.Fittherubber
bushing over the MIC jack.