Owner`s manual

Selecting a Channel
Press / to select the desired channel.
Channel Banks - Using the POLICE Button
The UH8080NB has three banks (groups) of
channels to select from;
CB  UHFCB+UserprogrammableRXchannels¹
POL Pre-programmed Police frequencies²
FIRE Pre-programmedFire&Ambulancefrequencies²
When the CB icon is showing the 80 UHF-CB and any
user programmed RX channels will be available for
selection or scanning. The 80 UHF-CB channels are
numbered 01-80. The user programmable RX channels are numbered 81-180 and only
show,intheDCS/CTCSScodearea,whenprogrammed.
When the POL icon is showing then pre-programmed police frequencies will be
available. When the FIREiconisshowingthenpre-programmedre&ambulance
frequencieswillbeavailable.Thepolice,re&ambulancefrequenciesdonothave
channelnumbers,insteadPO appears in the channel display for a police frequency
and FIappearsforareorambulancefrequency.
1. Press [POLICE] to select the desired channel bank(s) combination.
The channel banks can be selected as follows;
---- CB ----
POL ---- ----
---- ---- FIRE
POL ---- FIRE
POL CB ----
---- CB FIRE
POL CB FIRE
NOTE
¹Availablefrequencies&channelsarewithin400-520MHzBandonly
in 12.5kHz steps.
²Police,Fire&Ambulancereceptionisunencryptedanalogue.
Foryourreferencealistoftheavailablechannels,corresponding
frequencies and guidelines for their use is printed on p.43 - p.45. For
Australia,Channels05and35arereservedforEmergencyCalls.
Operation
14
UNIDEN UH8080NB UHF CB Transceiver