Owner`s manual

Operation

UNIDEN UH8080NB UHF CB Transceiver

Programming the Instant Priority Channel

Press / to select the Priority

Channel you prefer. Press and hold [INST]

for 2 seconds to store the new setting.

INST icon appears to designate the

Instant channel.

Recalling the Instant Channel

Momentarily press [INST] to return to

the Instant Channel. Press [INST] again to

return to the previous channel.

Transmitting

The UH8080NB transmits only on UHF-CB Channels.

NOTE

Foryourreferencealistoftheavailablechannels,corresponding

frequencies and guidelines for their use and selection is printed on p.43

-p.45.ForAustralia,Channels05and35arereservedforEmergency

Calls.

Select the desired channel. Press [PTT] on the side of the Remote LCD Speaker MIC

and speak normally into the microphone. Hold it approx. 7cm from your mouth. Release

[PTT] to end the transmission and listen for a reply.

PTT

CALL

INST