Owner`s manual

Scanning
The UH8080NB has a scanning feature
that allows you to search for active channels
automatically.
SCAN only checks channels or frequencies
thatareintheSCANMemory,whichare
indicated by the M (memory) icon. The
UH8080NB has two SCAN Memory modes;
Open Scan (OS) mode and Group Scan (GS)
mode,togiveyouexibilityandallowyouto
use the radio more effectively.
Furthermore,anycombinationofthethreechannelgroupscanbescannedbypressing
[POLICE] during scan to select the desired channel groups.
1. Press [SCAN] to start Scanning. The SCAN icon appears.
2. The scan direction can be changed at any time by pressing
/ .
3. Press [SCAN] to stop Scanning.
Add/Remove Channels from SCAN Memory
Select which Scanning Mode you wish to use
- OS or GS. Select the channel you want to store.
Press and hold [MEM] to store. MEM icon appears
and two beep tones sound.
ToremovethechannelfromSCANmemory,
press and hold [MEM] once more.
The MEM icon disappears.
Operation
19
UNIDEN UH8080NB UHF CB Transceiver