Owner`s manual

Operation
20
UNIDEN UH8080NB UHF CB Transceiver
Open Scan (OS) Mode
OSModeisthedefaultscansetting.AllUHF-CB,user-programmedextraRXchannels,
PoliceandFire&AmbulancefrequencieshavebeenaddedtotheOSSCANMemoryfor
convenience.Toadd/removechannelsfromOSSCANMemory,refertop.19.
Allows continuous scanning of all selected channels. If an active channel
isfound,scanningwillstoponthatchannel.Ifthereceivedsignalceases,theunitwill
wait3secondsforthesignaltoreturn,otherwisescanningresumes.
Aftertransmissioninscanmode,theunitwillwait20secondsforthesignaltoreturn,
otherwise scanning resumes.
Toskiptheactivechannel,press
/ momentarily.TodeactivateSCAN,press
[SCAN].
NOTE
IfSCANisdeactivatedwhileonanactivechannel,theUH8080NBwill
stayonthatactivechannel.Ifnochannelsareactive,theUH8080NBwill
reinstate the starting channel.
NOTE
OS Mode is indicated by the absence of the GS icon.