Owner`s manual

Operation
21
UNIDEN UH8080NB UHF CB Transceiver
Group Scan (GS) Mode
GS Mode has no channels in the SCAN Memory
by default. Channels must be added to the
GS SCAN Memory before group scan can start.
Toadd/removechannelsfromGSSCANMemory,
refer to p.19.
Includes the accessory feature Priority Watch
which allows you to monitor the Instant Priority
Channel while scanning (see p.15 for setting
Instant Priority Channel and p.22 to turn on
Priority Watch).
GS Scanning checks the Instant Priority Channel for activity regularly when Priority
Watch is ON.
If the Priority Channel becomes active the radio will stay on that channel for as long as
thesignalispresent.Ifthereceivedsignalceases,PriorityScanningcontinuesafter3
seconds.
IfscanningstopsonachannelwhichisnotaPriorityChannel,UHFCBRadiowill
continue monitoring the Priority Channel for activity while listening to the active one.
To select GS Scan Mode:
1. Press [MENU] three times.
 TheGSsettingashes.
2. Press
/ to change the setting between ON and OFF.
3. Press and hold [MENU]tosave&exitfromthemenumode.
NOTE
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.