Owner`s manual

Operation
22
UNIDEN UH8080NB UHF CB Transceiver
Priority Watch
To switch Priority Watch On/Off;
1. Press [MENU] two times.
 ThePriorityWatchsettingashes.
2. Press
/ to change the setting
between ON or OFF.
3. Press and hold [MENU]tosave&exit
from the menu mode.
NOTE
IfSCANisdeactivatedwhileitistunedtoanactivechannel,the
UH8080NB will stay on that active channel. If none of the channels are
active,theUH8080NBwillreinstatethescanstartchannel.
NOTE
If OS/GS Scanning is initiated when there are no channels programmed
inOS/GSmemory,anerrortonewillbeheardandscanningwillnotstart
(seeAdd/RemoveChannelsfromSCANMemory,p.19).
Selecting the Call Tone (Wake Up Tone)
1. Press [MENU] four times.
 Thecalltonesettingashes.
2. Press
/ to change the
 settingbetween1,2,3...10.
3. Press and hold [MENU] to save
 &exitfromthemenumode.
NOTE
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.