Owner`s manual

Operation
25
UNIDEN UH8080NB UHF CB Transceiver
Volume Sync
Use this set which speaker(s) the Volume
/ buttons control.
Set 01 to control the speaker volume of the
Base unit only.
Set 02 to control the speaker volume of
Remote MIC only.
Set 03 to control the speaker volume of both
Base unit and Remote MIC - both volume levels
will be synchronised.
1. Press [MENU] nine times.
 TheVolumeSyncsettingashes.
2. Press
/ tochangethesettingbetween01,02or03.
3. Press and hold [MENU]tosave&exitfromthemenumode.
NOTE
•Thespeakerthatisnotselectedforcontrolmaintainsitsprevious
volume setting.
•WhenanoptionalExternalSpeakerisconnectedtotheExt.Sp.jackof
thebase,itsubstitutesfortheBaseunitspeakerwhichbecomesmuted.
Therefore01MAIN&03SYNCcontroltheExternalSpeakerinplaceof
the base unit speaker.
NOTE
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.