Owner`s manual

Operation - Special Features

UNIDEN UH8080NB UHF CB Transceiver

Store a Police or Fire frequency to a RX Channel

SelectthePoliceorFire(&Ambulance)channelsgroupbypressing[POLICE],and

then select a desired frequency using

/ .

OrduringSCAN,whenscanstopsonaPoliceorFire(&Ambulance)frequencywhich

you wish to store press [HOLD] to stay on that frequency.

1. Press and hold [MENU].ThelowestavailableemptyRXchannelwillappear,

 alternatingwiththeselectedPoliceandFire(&Ambulance)frequency.

2. Change the RX channel using

/ if desired.

3. Press and hold [ENTER].Aconrmationtonesoundstoindicatethenewchannelis

programmed.

 TheRXchannelnumberashes.

4. If a name is desired press [SQL] to begin Alpha Tag edit (see manual programming

above).

5. Press and hold [ENTER],orwaitfor10sec,toexitprogrammingmode.

Store a frequency found using CLOSE CALL to a

RX Channel

Start Close Call RF Capture feature.

When an active frequency is found which you wish to store press [HOLD] to stay on

that frequency.