Owner`s manual

Operation - Special Features
29
UNIDEN UH8080NB UHF CB Transceiver
Instant Replay
The Instant Replay feature automatically records up to 1 minute of received signal(s)
which can be instantly replayed (through the speaker) by pressing [REPLAY].
Instant Replay automatically records receive signal(s) in the following modes;
 • CB&ExtraRXchannel,PoliceandFire(&Ambulance)channelmode
 • ScanMode
 • CloseCallRFCapturemode
Instant Replay does not record when in monitor mode (SQT-0 setting in normal channel
mode).
Press [REPLAY] at anytime to;
1. Playback the most recent received signal.
OR
2. Playback the most recent recorded signal in the replay buffer (if Instant Replay
 automaticreceiverecordwasturnedOff,seeTurningInstantReplayOn/Offbelow).
During playback the display shows REPLAY and the number of the currently playing
recording.
Afterthemostrecentreceivedsignalhasbeenplayedback,alongconrmationtone
sounds and the radio returns to the previous mode.
During playback older recordings can be accessed by pressing
/ to skip
forward/back between recordings stored within the 1 minute buffer. The record number
indicates which discrete recording is currently being replayed.
NOTE
•Receivedsignalsshorterthan500msarenotrecorded.
•Automaticrecordingofreceivesignal(s)istemporarilysuspended
during Instant Replay playback.
•Olderrecordingsareautomaticallyoverwrittenwhennewrecordings
are stored.
•Mostreceivedcommunicationsareshortandthe1minutebuffermay
contain several recordings.
•Transmissions(TX)arenotrecorded.
Turning Instant Replay On/Off
Instant Replay is ON by default. The icon displays to indicate Instant Replay
automatic record is On.
Press and hold [REPLAY] to turn Instant Replay On/Off. Two beep tones sound.
Turn Instant Replay Off if you want to prevent the current 1 minute of recordings from
being overwritten.