Owner`s manual

UNIDEN UH8080NB UHF CB Transceiver

Operation - Special Features

To Activate/Deactivate Tone Squelch (TSQ) on a

Channel

1. Use / to select the channel you want to put in or take out of ‘QUIET’ mode.

2. Press and hold [TSQ] for 2 seconds.

Two beeps will sound and the TSQ icon appears on or disappears from the LCD

display.

Receiving a Selcall

WhileinTSQmode,whenUH8080NBreceivesacodematchingyourSelcallID,itwill

perform the following operations:

a) Automatically responds to the caller by transmitting Acknowledge Tones.

b) Informs you that a caller is on the Channel by emitting a CALL ALARM

(Default Alarm Setting: four successive beeps in a regular interval for 10 seconds.

 Refertop.40,‘AlarmMode’forotheralarmsettings)anddisplaystheCALicon.

c) Flashes the TSQ icon for about 20 seconds allowing you to use the PTT button. If

 youarenotabletorespondwithinthe20secondperiod,TSQiconstopsashingand

‘QUIET’ mode resumes.

NOTE

The UH8080NB can decode a Selcall call even though not in ‘QUIET’

mode.