Owner`s manual

Connecting the Microphone

UNIDEN UH8080NB UHF CB Transceiver

MIC Jack

BeforeconnectingtheMicrophoneJackdecideifyouneedtousethe2metre

Extension Cable - simply connect the MIC plug into the jack end of the Extension

Cable

Push the MIC plug or Extension Cable plug into the MIC jack of the radio until the

connection locks into place. Gently tug the MIC or Extension Cable cord to test that the

connection is locked. Use the rubber cover which is on the cord to seal the MIC jack

entry from dust.

NOTE

Connect the Remote LCD Speaker MIC only to the microphone jack

nearest the end. The spare (covered) jack is for future expansion and

should not be used.

Disconnecting the MIC from the MIC Jack

Pullbacktherubbercoverandmoveitdownalongthecord.Usingtheatbladeofa

screwdriver or similar object carefully push the lock tab of the MIC plug towards the

MIC cord and at the same time tug on the MIC cord to draw back the MIC plug.