Use and Care Manual

22
English
You can get more information on MMSI numbers at these resources:
The dealer where you purchased the radio
Recreational boaters can obtain an MMSI number from the Boat Owner’s Association
of the U.S. (http://www.boatus.com/mmsi/ or call 800-536-1536) or Sea Tow Services
International (http://seatow. com/boating_safety/mmsi.asp)
Commercial boaters need a ship station license to get an MMSI number. For more
information, visit the Federal Communications Commission (FCC) website at http://
wireless.fcc.gov/marine/ fctsht14.html.
Entering MMSI numbers
Individual or User MMSI Number
NOTE: Be sure you have the correct User MMSI number before entering it in the radio. The
radio only allows you to enter the user MMSI once. If you need to re-enter the User MMSI
number, contact customer service (see back page for contact information).
Follow the steps below to enter your individual or user MMSI number into the radio:
Display the normal menu and choose the Setup sub-menu.
Select User MMSI. (If an MMSI number was already entered, the screen displays it with
the message Cannot change over 1 time. Contact customer service. (See back page for
contact information.).
Use CHANNEL UP and CHANNEL DOWN to enter the first of the nine digits; CHANNEL UP
increases the number and CHANNEL DOWN decreases it.
When the first digit is correct, press ENT-1W/25W . The cursor moves to the next digit. Enter
the remaining eight digits of the MMSI number in the same way. If you make a mistake
while entering a number, press CLR-SCAN to erase the wrong number and the cursor is
moved to the left digit.
When the ninth digit is correct, press ENT-1W/25W . The radio displays the new MMSI
number and asks you to confirm. To save this MMSI number, select Yes; the radio asks
for confirmation again. To cancel this MMSI number, select No; the radio returns to the
Setup menu.
NOTE: Be sure you entered the number correctly before confirming the entry. You can only
save the user MMSI once.
Before saving the number, the radio displays a final confirmation screen and reminds
you that this is a permanent setting. Press ENT to accept this MMSI. Press CLR to return to
the User MMSI Entry screen




1.
2.
3.
4.
5.

6.
0________
Use the up and down arrows
to adjust each of the nine
digits in turn.
16
User MMSI
Back[CLR] Forward[ENT]
User MMSI
Setup
Press and hold
[New]
0________
Use the up and down arrows
to adjust each of the nine
digits in turn.
16
User MMSI
Back[CLR] Forward[ENT]
User MMSI
Setup
Press and hold
[New]