How to Guide
1.
ENT
1W/2.5 W
ENT
1W/2.5 W
ENT
1W/2.5 W
Display the normal menu and choose the Setup sub-menu.
2. Select FIPS Codes. The screen displays any previously-entered FIPS codes.
3. To add a new FIPS code, select New.
4. Use
CHANNEL UP
and
CHANNEL DOWN
to change the first of the six digits;
CHANNEL UP
increases the number and
CHANNEL DOWN
decreases it.
5. When the first digit is correct, press
. The cursor moves to the next
digit. Enter the remaining five digits of the FIPS code in the same way. If you make a
mistake while entering a digit, press
to erase the wrong number and moved
the cursor to the left digit.
6. When the sixth digit is correct, press
. The radio displays the new FIPS
code and asks you to confirm. To save this code, select Yes; to cancel this code, select
No. The radio returns to the list of FIPS codes.
7. To change an existing FIPS code, select the code you want to change.
8. To delete the FIPS code, select Delete. To edit the code, select Edit, then use
CHANNEL
UP
and
CHANNEL DOWN
buttons to change each of the six digits.
9. When you are satisfied with the list of FIPS codes, select Exit to close the menu screen.
Contrast
Your radio display has 10 levels of contrast. To adjust the contrast, press and hold
MENU
while the radio is idle. Select System and then Contrast. Use
CHANNEL UP
and
CHANNEL DOWN
to change the contrast to your desired level.
To restore the default contrast setting, turn the radio off. Press
and hold it in
while you turn the radio on.
Lamp adjust
Your radio has 10 brightness levels on the display. To adjust the brightness, press and hold
while the radio is idle. Select System and then Lamp Adjust. Use
CHANNEL UP
and
CHANNEL DOWN
to change the brightness to your desired level.
Turning the key beep on and o
Key beep is the tone that sounds when you press a key or a button. To turn off the key
beep, press and hold
while the radio is idle. Select System and then Key Beep.
Choose Off to turn off the key beep.
SETTING THE GPS POSITION MANUALLY
If the radio is not receiving valid GPS data, the radio displays Input Position. Follow the
steps below to manually input your position.
14