How to Guide
1.
CALL
ENT
1W/25W
ENT
1W/25W
ENT
1W/25W
Display the normal menu and choose the Setup sub-menu.
2. Select User MMSI. (If an MMSI number was already entered, the screen displays
it
with the message Cannot change over 1 time.
Visit our website at www.
unidensupport.com for help.)
3. Use
CHANNEL UP
and
CHANNEL DOWN
to enter the first of the nine digits;
CHANNEL
UP
increases the number and
CHANNEL DOWN
decreases it.
4. When the first digit is correct, press
. The cursor moves to the next digit.
Enter the remaining eight digits of the MMSI number in the same way. If you make
a mistake while entering a number, press
to erase the wrong number and
the cursor is moved to the left digit.
5. When the ninth digit is correct, press
. The radio displays the new MMSI
number and asks you to confirm.
# NOTE: Be sure you entered the number correctly before confirming the entry. You can
only save the user MMSI once.
6. To save this MMSI number, select Yes, then confirm the number. To cancel this MMSI
number, select No. The radio returns to the Setup menu.
Group MMSI number
You can change the group MMSI number as often as you want. Follow the steps below to
enter a group MMSI number into the radio:
1.
CALL
ENT
1W/25W
ENT
1W/25W
Display the normal menu and choose the Setup sub-menu.
2. Select Group MMSI. If one was entered previously, the screen displays it.
3. Group MMSI numbers always start with a 0, so that digit is already entered for
you. Use
CHANNEL UP
and
CHANNEL DOWN
to change the second of the nine digits;
CHANNEL UP
increases the number and
CHANNEL DOWN
button decreases it.
4. When the second digit is correct, press the
. The cursor moves to the
next digit. Enter the remaining seven digits of the MMSI number in the same way. If
you make a mistake while entering a number, press
to erase the wrong
number and the cursor is moved to the left digit.
5. When the ninth digit is correct, press
. The radio displays the new MMSI
number and asks you to confirm.
17