How to Guide

CONNECTING TO AN EXTERNAL SPEAKER

You can use an external speaker to monitor the radio from a different part of your boat or

in a noisy environment. If you adjust the



knob on the radio, it will also adjust

the external speaker volume.

Your radio supports an external speaker with the following specifications:

x Minimum impedance of 4 Ohms

x Minimum power handling of 10 Watts

1. Connect the BLACK wire of the accessory cable to the GROUND WIRE of your external

speaker.

2. Connect the RED wire of the accessory cable to the POSITIVE (+) WIRE of your

external speaker.

3. Be certain all wire connections are secure and that all open wires are adequately

covered.

# NOTE: To extend the life of the radio, use waterproof tape to seal electrical connections.