Owner`s manual
22
Uniden MHS450 Radio Owner’s Manual
Changing channel names
If you discover that a marine radio channel has a different
common name in your local area, you can change the name
of that channel to make it easier for you to use (see the
channel lists starting on page 28 for the default channel
names). To rename a channel, follow the steps below:
Open the menu and choose Channel Name.The
screen displays the list of channels.
Use CHANNEL UP and CHANNEL DOWN buttons to
highlight the channel you want to change and press
the ENTER button.
Select Rename to enter a new name for this channel
or Default to restore the channel’s original name.
If you select Rename, the radio prompts you to enter
a new name for this channel. Each name can be up
to 16 characters. Use the CHANNEL UP and CHANNEL
DOWN buttons to change the rst character.
When the rst character is correct, press the ENTER
button. The cursor moves to the next character. Enter
the remaining 15 characters of the name. (If the name
is shorter than 16 characters, press the ENTER button
repeatedly to complete the name entry.
When you nish entering the name, the radio sounds a
conrmation tone and returns to the channel list.
When you are satised with the list of channel names,
select Exit to close the menu screen.
Using FIPS codes for weather alerts
The US National Weather Service established 6-digit Federal
Information Processing System (FIPS) codes to issue
weather alerts in specic areas. You can choose which areas
you want to hear alerts for by entering these FIPS codes
in your radio. This can prevent you from being bothered by
events that are far from where you are boating. The radio
1.
2.
3.
4.
5.
6.
7.