Owner`s manual

23
Uniden MHS450 Radio Owner’s Manual
only sounds the alert tone if an incoming FIPS code matches
one of the areas you selected.
For more information about how the NWS uses FIPS
codes, see the NWS website:
www.nws.noaa.gov/nwr/nwspschg.htm.
To see an index of FIPS codes by state, see the
website of the National Institute of Standards and
Technology (NIST):
www.itl.nist.gov/pspubs/co-codes/states.htm.
Note: If you travel outside the areas you have entered
into your radio, you may not hear alerts that effect
your new location. Be sure to enter the FIPS codes of
all the areas you plan to travel to on this trip.
Follow the steps below to edit the list of FIPS codes. You can
store up to 20 different FIPS codes in your radio.
Open the menu and select FIPS Codes.
The screen displays any
previously-entered FIPS codes.
To add a new FIPS code, select
Add.
Use the CHANNEL UP and
CHANNEL DOWN buttons to
change the rst of the six digits;
the CHANNEL UP button
increases the number and the
CHANNEL DOWN button
decreases the number.
When the rst digit is correct, press the ENTER
button. The cursor moves to the next digit. Enter the
remaining ve digits of the FIPS code in the same way.
When the sixth digit is correct, press ENTER. The radio
returns to the list of FIPS codes.
To change an existing FIPS code, select the code
you want to change, then select Delete or Edit, then
•
•
1.
2.
3.
4.
5.
6.
023456
Add
FIPS CODES
Exit
023456
Add
FIPS CODES
Exit
0 _ _ _ _ _
P r e s s t h e U P o r D O W N
a r r o w k e y s t o s e l e c t
t h e c h a r a c t e r t h e n
p r e s s t h e e n t e r k e y
0 _ _ _ _ _
P r e s s t h e U P o r D O W N
a r r o w k e y s t o s e l e c t
t h e c h a r a c t e r t h e n
p r e s s t h e e n t e r k e y